Installation and operating instructions
LUXOMAT
®
KNXnet/IP Interface Multicontrol
GB
1. General use
The KNXnet/IP Interface Multicontrol includes all the modules
required to implement time switching functions, trigger condi-
tions for defined events, event handling, logic functions and
the function of a real-time clock.
The following are available:
- Weekly switching programs (100 time switch entries)
- Event trigger / threshold switch (30 triggers)
- Event processing / scenes (200 events)
- Logic functions (30 logic functions)
- Real-time clock with battery backup
- Tunnel link to bus for visualisation
- Automatic time synchronisation via UDP time server
- Automatic adjustment to daylight-saving time
- IP address assignment via DHCP
In the device, up to 80 objects are defined with free data
type assignment from the following options:
- 1 bit (EIS 1)
- 1 byte without sign bit (EIS 14)
- 1 byte with sign bit (EIS 14)
- 2 bytes without sign bit (EIS 10)
- 2 bytes with sign bit (EIS 10)
- 2 bytes floating (EIS 5)
- 4 bytes without sign bit (EIS 11)
- 4 bytes with sign bit (EIS 11)
- 4 bytes floating (EIS 9)
7. Location and function of indication and control
elements
The device connections, as well as the learn button and pro-
gramming LED that are required during EIB startup, can only
be accessed in the distributor when the cover is removed.
The pushbuttons (Move, Prg/Set, ESC) and the 2 - line display
can be operated when the distributor cover is closed.
A1: 24 V bus terminal
A2: KNX bus terminal
A3: Ethernet RJ45 socket
A4: KNX programming LED
A5: KNX learn button
A6: Display 2 x 12 characters
A7: Move button
A8: Prg/Set button
A9: ESC button
A10: Ethernet Link LED
A11: Ethernet Activity LED
A12: Battery compartment
6. Technical data
Power supplies
• 24 V AC/DC; input range 12 .. 30V AC/DC
• Additionally via EIB/KNX bus
Control elements
• Learn button for switching between standard and
addressing mode
• 3 x pushbuttons (Move, Prg/Set, ESC) on the front for
setting the device (time and date) and indication of
the IP and MAC address
Indication elements
• Red LED for indicating standard/addressing mode
• Green LK LED for indicating the Ethernet link
• Green LA LED for indicating communication on the
Ethernet link
• LCD with 2 lines of 12 characters for indicating the
time and date
Connections
• Bus line: EIB/KNX bus terminal (black/red)
• Power supply: Bus terminal (yellow/white)
• Ethernet 10 Mbps: RJ45 socket
Mechanical data
• Casing: Plastic LEXAN UL-94-V0
• Dimen sions for REG casing 4 div.:
Width: 70 mm
Height: 55 mm
Length: 86 mm
• Weight: 150g
• Installation: On standard 35mm DIN rail
Electrical safety
• Pollution degree: 2
• Degree of protection (according to EN 60529): IP20
• Protection class (according to IEC 1140): I
• Surge voltage category: III
• Bus: Safety extra-low voltage SELV 24 V DC
EMC requirements
Meets EN 50081-1 and EN 50082-2,
EN 50090-2-2
Ambient conditions
• Resistance to extreme climates: EN 50090-2-2,
• Ambient conditions during operationb: 0°C to +45°C
• Storage temperature: -25°C to +70°C
• Relative humidity (no condensation): 5% to 93%
Approval
EIB/KNX registered
CE marking
In accordance with EMC directive (residential and functional
building), low-voltage directive
2. Device types and accessories
At present, the following device types are available from the
Interface product group:
KNXnet/IP Interface Multicontrol Part number: 90124
KNXnet/IP Interface Part number: 90125
KNXnet/IP Interface Web Part number: 90126
3. Scope of supply
The KNXnet/IP Interface Multicontrol is supplied as standard
with the following individual components:
• Complete device including battery with EIB bus terminal
(black/red) and 24V supply bus terminal (yellow/white)
inserted
• Operating and installation instructions
4. Application programs
At present, the following application programs are available:
KNXInterface-90124, for function of the application program
see application program description
A4
A1
A3
A7
A8
A9
A6
A10
A11
A12
A5
A2
All defined objects can be used by all available modules.
This means that up to 80 objects can be selected for time
switching functions, as inputs for logic functions, as trigger
objects or as outputs for the event programs.
46
60
86
70
55
46
5. Installation notes
• The device should only be installed and started up by an
approved electrical engineer.
• Observe the applicable safety and accident prevention
regulations.
• The device is designed for fixed installation indoors in dry
conditions.
• When connecting the device, ensure it has been discon-
nected from the power supply.
• The device must not be opened. Faulty devices should be
returned to the manufacturer.
• When planning and erecting electrical systems, observe
the specifications and regulations of the relevant country.
To Next Page
Need help?
General
