BH1
•The BH1, or B-hyve Wi-Fi Hub, is used to connect Bluetooth products to the internet. As of right
now, the HT25 is the only product that requires the hub to connect to the internet.
•You cannot have just the hub on an account, you need another timer in order to have the ability
to access your account.
•Indoor mount only (unless you have an outdoor box to put it in)
•You should not remove the USB from the plug.
•You can only change the name and picture of the device in the app.
•Uses Bluetooth to communicate with HT25, Wi-Fi to connect to internet
•Creates a “Mesh” network
•You can use a Gen 2 WT25 or a WT24 as a replacement for a BH1
To Next Page
Loading...