Baby Jogger POD User Manual

2
CANOPY
1 Lay chassis back so the handle is
resting on the ground. Locate the
white support rod at the top rear
of the POD seating compartment.
2 Insert support rod into black canopy brackets located
on each side of the frame.
3 Locate the white support rod
at the top center of the POD
seating compartment.
4 Insert support rod into black canopy brackets located
on each side of the frame.

Baby Jogger POD Specifications

General

Brand	Baby Jogger
Model	POD
Category	Stroller
Language	English