3
1 To install rear wheels: Insert wheel axle into wheel
mount on chassis frame until it clicks into place.
NOTE: Ensure the wheel is properly secured
to frame, test by gently trying to pull the
wheel out after installing.
2 To remove rear wheels: Press the wheel release
button while sliding the wheel away from the
wheel mount.
Wheel Mount
Release Button
2 Lift up on the brake pedal to
disengage the parking brake.
1 Push the brake pedal down to
engage the parking brake.
Warning: Engage parking brake before loading and unloading passenger(s).
Engaged Disengaged
REAR WHEELS
& PARKING BRAKE
To Next Page
Loading...
