Baby Lock EclipseDX BLE1DX-2 - Bypassing the Threading Port

37
U
S
I
N
G
S
P
E
C
I
A
L
T
Y
T
H
R
E
A
D
S
Bypassing the Threading Port
Heavy weight thread, such as pearl cotton, ribbon thread
and fine yarn, must be tied onto the existing looper
(fig.A)
extending from the threading mechanism (fig.B) Leave
the thread in the looper arm itself.
an overhand knot (fig.C). Pull on the regular thread
from the looper eye until the specialty thread comes
(fig.D)
Insert 2 inches of your decorative thread into the cradle
loop. Pull on the loose ends of the thread cradle from the
D.
A.
C.
B.