Baby Trend Secure Snap Tech 35 User Manual

If you experience any difculty in using this product, please contact our
customer service department at 1-800-328-7363 between the hours of
8:00 a.m. and 4:30 p.m. Pacic Standard Time for assistance. Please have
your model number and manufacturing date available when you call. This
information can be found on a small sticker on the bottom of the product.
STOP
CS66
Secure 35 Infant Car Seat OWNER’S MANUAL
Para instrucciones en Español, conéctese a
www.babytrend.com o llamar al: 1-800-328-7363.
Copyright © 2021, Baby Trend, Inc.
CS66xxx_EN_110120
Carefully read and understand all instructions and warnings in
this manual. Failure to properly use this Car Seat increases the
risk of SERIOUS INJURY or DEATH in a sudden stop or crash.
KEEP INSTRUCTIONS FOR FUTURE USE.
Store this manual in the pocket provided
on the side of the car seat base.
WARNING
1-800-328-7363
(8:00am ~ 4:30pm PST)
www.babytrend.com
Baby Trend, Inc.
13048 Valley Blvd.
Fontana CA 92335

Baby Trend Secure Snap Tech 35 Specifications

General

Type	Infant Car Seat
Weight Limit	4-35 lbs
Height Limit	Up to 32 inches
Harness Type	5-point harness
Safety Features	5-point harness
Compatibility	Compatible with most Baby Trend strollers
Rear-Facing	Yes
Installation Method	LATCH or Vehicle Seat Belt
Base Features	level indicator
Stroller Compatibility	Yes, with Baby Trend strollers
Additional Features	removable head support

Summary

1.0 General Warnings

3.0 Features and Benefits

3.1 Carrier WITH Harness System

Details the carrier component and its integrated harness system for child restraint.

3.2 Base

6.0 Important Safety Information

7.0 LATCH Anchorage System

8.0 Selecting a Vehicle Seat Location

8.1 Overall Considerations in Selecting a Location

8.2 Check that the Vehicle Seat Meets the Following Requirements

Outlines essential checks for vehicle seats to ensure safe car seat installation.

9.0 Vehicle Seat Belts

9.1 SAFE Vehicle Seat Belt Systems

9.2 Locking Clip Installation

9.3 UNSAFE Vehicle Seat Belt Systems

Identifies unsafe vehicle seat belt systems that should not be used with the car seat.

10.0 Securing Car Seat in Your Vehicle

10.1 Preparation for Installation in Vehicle

10.2 Base Installation with LATCH System

Details the process of installing the car seat base using the LATCH system.

10.2.1 Preparation for Installation with LATCH

10.2.2 Secure Base with LATCH Lower Connectors

Provides instructions on how to securely attach the base using LATCH lower connectors.

10.3 Base Installation with Vehicle Belt

Details the procedure for installing the car seat base using the vehicle seat belt.

10.3.2 Secure Base WITH Vehicle Combination Lap/Shoulder Belt

10.3.3 Secure Base WITH Vehicle Lap Belt only

10.3.4 Tightening Vehicle Seat Belt

10.4 Attach Car Seat to Base

Details how to properly attach the infant car seat carrier to the installed base.

10.6 Car Seat Only Installation without Base

Instructions for installing the car seat directly into the vehicle without using the base.

10.6.2 Securing Car Seat WITH Vehicle Combination Lap/Shoulder Belt

10.6.3 Securing Car Seat WITH Vehicle Lap Belt only

10.6.4 Tightening Vehicle Seat Belt

11.0 Harness System Use and Adjustment

11.1 Securing Your Child with Harness System

Details how to properly secure a child in the car seat using the harness system.

11.2 Adjusting Harness Strap Height

Explains how to adjust the height of the harness straps for optimal child fit.

11.2.1 Car Seat with Adjustable Back

11.2.2 Car Seat with Fixed Back

11.3 Adjusting the Crotch Strap Length

Provides instructions on adjusting the crotch strap length for a secure fit.

11.4 Adjust Seat Recline Angle

Guides on how to adjust the seat's recline angle using the Seat Angle Indicator.

12.0 Final Safety Check