Babybrezza formula pro advanced

To Next Page

Instructions

for set-up, use and cleaning

Rell the powder container when the

orange stirrers become visible.

Push the drip tray rmly against the base

to make sure it ts securely. Trust us, you

denitely don’t want it to fall o and spill

the entire bottle of formula you just made.

Keep your Formula Pro® Advanced

sparkling clean!

Nice job reading the instruction manual cover-to-cover!

Here are a few extra tips to keep you and your Formula Pro® Advanced happy.

Customer Service

babybrezza.com

Limited 1-Year Warranty

This product may be covered under one or more of the following including U.S. Patent No. 8,584,901,

Canada Patent No. 2,842,603, China Patent No. CN103874441, Australia Patent No. 2011374309, Spain Patent

No. ES2473790B2 and pending patent application(s) in the U.S. and other countries.

If you need help with your Baby Brezza Formula Pro® Advanced in the UK or Ireland, visit

cheekyrascals.co.uk/contact-us or email customerservice@babybrezza.com. Returns should be made to the store you

purchased it from, but before you do, please rst contact either Cheeky Rascals or Baby Brezza so that we can give you

expert advice customised to your particular situation. Returns cannot be accepted once powder and/or water has been

added to the machine unless there is a fault covered by the Warranty.

The limited warranty is valid only on products bought through authorized resellers and used in the UK and Ireland. Buying

through an unauthorized reseller or using this product outside of the UK and Irealand automatically voids this warranty.

This warranty is available to consumers only. You are a consumer if you own a Baby Brezza Formula Pro® Advanced that was

purchased at retail for personal, family or household use. Except as otherwise required under applicable law, this warranty is

not available to retailers or other commercial purchasers or owners. We warrant that your Baby Brezza Formula Pro®

Advanced will be free of defects in material or workmanship under normal home use for one year from the date of original

purchase when used in accordance with the instructions and maintained correctly. Customer will be required to present

original proof of purchase in order to obtain the warranty benets. In the event that you do not have proof of purchase date,

the purchase date for purposes of this warranty will be the date of manufacture. If your Baby Brezza Formula Pro® Advanced

should prove to be defective within the warranty period, we will repair it or, if we consider it necessary, replace it.

To obtain warranty services, in the UK or Ireland, please visit cheekyrascals.co.uk/contact-us.

Alternatively, contact customerservice@babybrezza.com

®



Distributed in the UK and Ireland by Cheeky Rascals Ltd, Liss Mill, Mill Road, GU33 7BD, UK

www.cheekyrascals.co.uk

For other EU countries, please contact Gamin Tout Terrain, 52 Rue Edouard Pailleron, 75019 Paris France

Main Page

Need help?

Do you have a question about the Babybrezza formula pro advanced and is the answer not in the manual?

Summary

Essential Safeguards for Your Babys Health

Assemble Your Formula Pro Advanced

Set Up the Controls

Temperature Indicator Symbols

Explains symbols for room, body, and slightly warmer than body temperatures.

Powder and Water Settings

Details how to select powder settings and water volume for formula preparation.

Warning Symbols

Describes symbols indicating issues like open lid, low water, or dirty funnel.

Easy Daily Cleaning Instructions

Monthly Descaling Instructions

Long Term Storage Instructions

The Baby Brezza Formula Pro Advanced is an innovative on-demand baby formula maker designed to simplify the process of preparing baby bottles. It automatically mixes formula powder and water to the perfect consistency and temperature, saving parents time and frustration.

Function Description:

The device's primary function is to prepare baby formula bottles quickly and accurately. It dispenses formula powder and water together, stopping automatically once the desired volume is reached. The Formula Pro Advanced allows users to select a specific powder setting (1-10) based on the formula brand, type, stage, and scoop weight, ensuring precise measurement. It also offers various water volume options, from 60ml to 300ml, and allows users to choose the desired temperature for the dispensed formula: room temperature, body temperature, or slightly warmer than body temperature. The machine features an LCD display that shows selected functions, warnings, and error codes, providing clear feedback to the user. A "water only" button allows for dispensing plain water, useful for rinsing or preparing bottles without formula.

Usage Features:

Before first use, or after a period of disuse, the machine requires a thorough rinse and cleaning of its removable parts. This involves washing the water tank, funnel, funnel cover, and other components with hot soapy water and allowing them to air dry. The powder container is then filled with formula powder, ensuring it is level and between the min and max lines. The drip tray can be adjusted to fit various bottle heights, ensuring the bottle's mouth is close to the funnel for optimal dispensing.

To prepare a bottle, users first select the correct powder setting using the "powder setting" button, referring to the babybrezza.com/fpa website for specific formula recommendations. Next, the desired water volume (ml) is selected using the "ml" button. It's important to note that the ml size indicates water volume only and does not include the volume of added powder. The temperature can also be adjusted using the "temp" button. Once all settings are confirmed, pressing the "start" button initiates the dispensing process. The machine will automatically stop when the bottle is ready. The temperature indicator flashes during heating and becomes solid when the set temperature is reached, preventing dispensing until the water is at the correct temperature.

The device incorporates several safety features. It will not operate if the powder container lid is not completely closed, if the water tank is low, or if the funnel is removed or not inserted correctly. Warning symbols on the LCD display alert users to these conditions. After dispensing, it's recommended to check the mixed formula for clumps and shake or stir the bottle if necessary. The temperature of the milk should always be checked before feeding the baby. The prepared milk is for immediate consumption only and should not be stored. The machine reverts to the last used settings after being unplugged or switched off, so users do not need to re-select powder settings every time, though they can be changed as needed.

Maintenance Features:

Regular cleaning is crucial for the Formula Pro Advanced to function accurately and hygienically. Daily Cleaning: The funnel and funnel cover must be cleaned after every four bottles. This involves removing them, washing with hot soapy water, rinsing well, and air drying completely before re-assembly. The powder-dispensing hole on the underside of the powder container should also be wiped clean to remove any spilled powder or milk. The water in the water container should be replaced daily to keep it fresh. Users can purchase an extra funnel and funnel cover to facilitate daily cleaning. Monthly Cleaning: Once a month, a more thorough cleaning is required. All removable parts, including the water tank, should be hand-washed with warm soapy water, rinsed well, and air-dried. It is explicitly stated that none of the parts should be washed in a dishwasher, sterilizer, or microwave. Monthly Descaling: To prevent mineral scale build-up in the water heater, a descaling process is recommended monthly. This involves emptying the water tank, filling it with a mixture of distilled vinegar and sterile or pre-boiled cooled water, and dispensing 600ml of this mixture in two 300ml cycles using the "water only" function. After dispensing, the machine is unplugged, the water tank is removed and emptied, and the machine is left to sit for four hours. Following this, the water tank is washed, rinsed, and refilled with sterile or pre-boiled cooled water. The machine is then plugged back in, and the entire tank of water is run through the machine using the "water only" function to rinse it thoroughly until the "Low Water" indicator turns on. Finally, the water tank is refilled with sterile or pre-boiled cooled water for normal use. Long Term Storage: For storage, it is extremely important to clean the machine and remove all formula powder residue. This involves removing all powder container parts, funnel, funnel cover, drip tray, and water tank from the base. The base should be wiped clean and dried. All powder container parts should be washed, air-dried, and reassembled. The monthly descaling steps (1-7) are followed, but the water tank is not refilled after step 7. A 300ml "water only" cycle is run continuously until the machine is completely empty. The machine is then unplugged, and the funnel, funnel cover, and water tank are air-dried and reinstalled. Finally, the machine is packed in its box or a bag to keep it dust-free.