Need help?Do you have a question about the Babyletto Gelato 12901 and is the answer not in the manual?
General| Product Name | Babyletto Gelato 12901 |
|---|---|
| Category | Baby & Toddler Furniture |
| Type | Crib |
| Material | New Zealand Pine Wood |
| Adjustable Mattress Height Positions | 4 |
| Weight Limit (Toddler Bed) | 50 lbs |
| JPMA Certified | Yes |
| Greenguard Gold Certified | Yes |
| Converts to | Toddler Bed |
| Mattress Compatibility | Standard crib mattress |
| Finish | Non-toxic |
| Color Options | White, Grey |
| Convertible Options | Toddler Bed |
Lists all components for the cot assembly, including panels, legs, and feet.
Details all necessary hardware such as bolts, washers, nuts, and tools for assembly.
Attach feet (E) to legs (C/D) using bolts (H1) and washers (H5).
Connect end panels (A-1) to front and rear legs (C-1, D-1, C-2, D-2) with bolts (H1) and washers (H5).
Attach side panels (B) to end panels (A-1) using bolts (H1) and washers (H5).
Install safety bolts and caps (H9) into designated holes to secure accessible areas.
Secure the mattress support (F-1) using bolts (H7) and nuts (H8) ensuring it is level.
Attach remaining side panels (B) to end panels (A-1) using bolts (H1) and washers (H5).
Complete assembly, recheck fasteners, and record cot details for warranty.
Essential warnings about infant safety, strangulation hazards, and fall prevention.
Caution against removing wood screws during normal disassembly to maintain cot integrity.
Specifies dimensions for the cot mattress to ensure safety and proper fit.
Provides advice on storing the cot and cleaning its finish safely.
Details the warranty terms and conditions for Australia.
Details the warranty terms and conditions for New Zealand.
Prepare for toddler bed conversion by attaching side rails using bolts and washers.
Install safety bolts and caps (H9) for the mattress support during conversion.
Secure the toddler bed conversion kit (G) using bolts (H2) and washers (H5).
To Next Page
