BaByliss PRO Rotating 800 - Blow-Drying Techniques; Blow-Drying Outwards; Blow-Drying Under; Maintenance and Care

5
• Repeat the operation if neces-
sary, according to the hair type.
• Give a shot of cool air at the end
for a long-lasting set. To do this,
use the cool-air setting without
turning the rotating head.
Blow-drying outwards
Place the brush under the section
at the tips of the hair, and start the
automatic rotation to turn out-
wards.
Blow-drying under
Place the brush above the section
at the tips of the hair, and start the
automatic rotation to turn out-
wards.
MAINTENANCE OF THE UNIT
• Unplug the unit and allow to cool
completely before cleaning or
storing.
• We advise a regular cleaning to
avoid build-up of hair, styling
products, etc.
Use a dry or very slightly damp
cloth for the plastic and ceramic
surfaces.
• For more convenience, the brush
attachment is removable and
washable under the tap. Remove
the brush attachment from the
handle, put it under running wa-
ter and then let it dry. Make sure
the brush attachment is thor-
oughly dry before reassembly
with the handle.
• Place the protective brush shield
over the brush heat to protect
the bristles.
Warning: only the brush attach-
ment is washable. The handle
must never be exposed to water.