To Next PageTo Next Page
Need help?Do you have a question about the BaByliss BERRY CRUSH and is the answer not in the manual?
Warning that the appliance gets hot and must be kept out of reach of children during and after use.
Key safety instructions including avoiding bathrooms, water, and use on children.
Steps for preparing hair, dividing into sections, and placing the curling wand for styling.
Guidance on winding hair, holding time, and selecting appropriate heat settings for different hair types.
Details on the automatic shut-off feature that activates after 72 minutes of continuous operation.
Conditions that void the product guarantee, such as misuse, unauthorized repairs, and incorrect voltage.
Contact details and return address for product support, repairs, or exchanges.
The BaByliss Berry Crush Curling Wand (model 2523RU) is a hair styling appliance designed to create curls. This instruction booklet provides essential safety information, usage guidelines, and maintenance tips to ensure proper and safe operation of the device.
The primary function of the BaByliss Berry Crush Curling Wand is to curl hair using heat. It is equipped with a barrel around which sections of hair are wrapped to form curls. The appliance offers multiple heat settings, allowing users to select a temperature appropriate for their hair type, ranging from delicate and fine to thicker hair. An indicator light flashes until the selected temperature is reached, signaling that the device is ready for use. For safety, the curling wand features an automatic shut-off mechanism that activates after 72 minutes of continuous operation. If further use is desired after the automatic shut-off, the user can simply rotate the temperature dial to the 'OFF' setting and then back to a suitable heat setting to reactivate the power.
Before using the curling wand, it is crucial to ensure that the hair is dry and thoroughly combed to remove any tangles. The hair should then be divided into sections, preparing it for styling. To begin, the user rotates the temperature dial to turn on the appliance and select the desired heat setting. The indicator light will flash until the chosen temperature is achieved.
A key safety feature for usage is the inclusion of a universal heat protective glove. This glove should be worn on the hand that will be wrapping hair around the barrel, providing initial contact protection against the hot surface. It is important to note that the glove is designed for temporary contact protection, and prolonged contact with the hot surface will still cause discomfort.
When styling, a section of hair should be taken, starting approximately 2 inches from the scalp. The appliance is then placed next to this hair section, with the end of the appliance pointing downwards towards the shoulder. The hair is then wound around the widest part of the barrel, continuing down the length of the barrel until no more hair can be wrapped. The end of the hair section should be held in place for 5-8 seconds, with the exact duration depending on the hair type. After this period, the section of hair is unwound or released, and the appliance is pulled away. For optimal results, it is recommended to allow the curl to cool before further styling. This process is then repeated for each section of hair.
The curling wand offers a range of temperature settings to cater to different hair types:
For delicate, fine, bleached, or colored hair, lower heat settings are recommended. Thicker hair types can utilize higher heat settings. It is advisable to perform a test on initial use to determine the correct temperature for a specific hair type, starting with the lowest setting and gradually increasing until the desired result is achieved.
After use, the temperature dial should be rotated to the 'OFF' position to switch off and unplug the appliance. The appliance must be allowed to cool completely before being stored away.
Proper care and maintenance are essential to keep the BaByliss Berry Crush Curling Wand in optimal condition and ensure its longevity.
One crucial maintenance tip concerns the power cord. Users should avoid wrapping the lead tightly around the appliance. Instead, the lead should be coiled loosely by the side of the appliance to prevent damage. It is also important not to use the appliance at a stretch from the power point, as this can strain the cord and potentially lead to damage.
Always unplug the appliance after each use. This not only conserves energy but also prevents accidental activation and ensures safety.
The appliance comes with a heat protection mat. During use, and especially after use, the appliance should not be placed on any heat-sensitive surface, even when using the provided heat mat. The mat helps protect surfaces, but the appliance will remain hot for several minutes after being switched off, so it should be kept out of reach of children during this cooling period.
Regular inspection of the appliance for any noticeable signs of damage before each use is also a key maintenance practice. If any damage is observed, especially to the lead, the appliance should not be used and should be returned to a customer care center for repair or replacement. No repair attempts should be made by the consumer.
By following these usage and maintenance guidelines, users can ensure the safe and effective operation of their BaByliss Berry Crush Curling Wand, prolonging its lifespan and maintaining its performance.
General| Product Type | Styling Iron |
|---|---|
| Brand | BaByliss |
| Model | BERRY CRUSH |
| Plate Material | Ceramic |
| Plate Width | 25 mm |
| Temperature Settings | 6 |
| Maximum Temperature | 235°C |
| Auto Shut-off | Yes |
| Swivel Cord | Yes |
| Cord Length | 2.5 m |
| Heat Up Time | 30 seconds |
| Voltage | 220-240V |
