To Next PageTo Next Page
Need help?Do you have a question about the BaByliss 4580U and is the answer not in the manual?
This appliance should only be used as described within this instruction booklet. Please retain for reference.
Polythene bags over product or packaging may be dangerous. To avoid danger of suffocation, keep wrapper away from babies and children.
Always keep out of reach of children (during and after use and whilst cooling). This appliance should not be used, cleaned or maintained by children.
Store in a well ventilated place. Protect from sunlight. Do not expose to temperatures exceeding 50°C / 120°F. Keep away from heat, sparks, open flames, hot surfaces, and animals.
Contains 2 powerful high heat energy cells for cordless use. The energy cells fit BaByliss appliances, Vidal Sassoon, Revlon, Remington, Philips, Clairol, Cosmopolitan® and other ThermaCELL® powered cordless stylers.
To insert or change the energy cell: remove end cap, unscrew empty cell anticlockwise, remove protective cap from new cell, slide in new cell and screw clockwise.
Check the level of fuel left in the energy cell by looking at the clear base of the cell while in a horizontal position.
Only one unit containing an energy cell may be carried per person aboard an aircraft. Additional energy cells are not permitted. Check with the airline before you travel.
Contact the Conair Customer Care Line on 03705 133 191 or e-mail ukinfo@conair.com for further advice.
This product may not be treated as household waste. Hand it to an appropriate collection point for recycling of Electrical and Electronic equipment.
The BaByliss Replacement Energy Cells (model 4580U) are designed to power cordless styling appliances. These energy cells are essentially high-heat gas cartridges that provide the necessary fuel for the device to operate without being tethered to a power outlet. The product is intended for use with various BaByliss appliances, as well as select models from other brands such as Vidal Sassoon (excluding models 702, 704 & 706), Revlon, Remington, Philips, Clairol, Cosmopolitan®, and other ThermaCELL® powered cordless stylers. This broad compatibility makes them a versatile power source for a range of personal care devices.
Safety is a paramount concern with these energy cells, as they contain highly flammable butane gas under pressure. Users are strongly advised to adhere to all safety cautions outlined in the instruction booklet. The appliance itself should only be used as described in the manual, and the booklet should be retained for future reference.
A critical aspect of safety involves children. The product packaging includes polythene bags, which are identified as a potential danger due to the risk of suffocation. Users are warned to keep these wrappers away from babies and children, emphasizing that the bag is not a toy. Furthermore, the appliance itself, when in use, gets hot. Therefore, it must always be kept out of reach of children, both during and after use, and while it is cooling down. Children should not use, clean, or maintain the appliance. If the appliance is used on or near children, extra care must be taken, and it should never be used on very young children. These precautions highlight the importance of adult supervision and responsible usage to prevent accidents.
The energy cells themselves require specific handling and storage due to their flammable contents. They must be stored in a well-ventilated place, protected from direct sunlight. The storage temperature should not exceed 50°C (120°F). Similarly, the cells should not be exposed to temperatures exceeding 50°C (120°F) during use or storage. It is crucial to keep the energy cells away from heat, sparks, open flames, and hot surfaces, and smoking near them is strictly prohibited. The containers should not be punctured or incinerated, even when empty. These warnings are in place to prevent explosions or fires that could result from improper handling of the pressurized butane gas. The cells contain Butane with EC number 270-704-2 and have a content of 12.5g.
Inserting or changing an energy cell is a straightforward process. If the appliance has an end cap, it must be removed first. The empty energy cell is then unscrewed by turning it in an anticlockwise direction and removed. Before inserting a new cell, the protective cap must be removed from the new energy cell. The new energy cell is then slid into the handle and screwed in by turning it in a clockwise direction until it fits snugly in place. Finally, if the appliance originally had an end cap, it should be replaced. This clear sequence of steps ensures that users can safely and correctly replace the energy cells, maintaining the functionality of their cordless stylers.
To check the level of fuel remaining in an energy cell, users can look at the clear base of the cell while holding it in a horizontal position. A visual indicator (as shown in Figure 1 of the manual) allows users to determine if the cell is full or empty. If a cell is empty, it should be replaced with a new BaByliss energy cell. This feature provides a convenient way to monitor fuel levels and ensure uninterrupted use of the appliance.
For air travel, specific regulations apply to devices containing energy cells. Only one unit containing an energy cell may be carried per person aboard an aircraft, and it must be inside check-in bags. Additional energy cells are not permitted. A protective heat shield must be securely in position over the heating element. These regulations are subject to the individual airline's discretion, so users are advised to check with the airline before traveling to ensure compliance and avoid any issues.
In terms of maintenance and disposal, the product emphasizes environmental responsibility. The symbol on the product or its packaging indicates that it should not be treated as household waste. Instead, it should be handed to an appropriate collection point for the recycling of Electrical and Electronic equipment. This ensures that the product is disposed of correctly, preventing potential negative consequences for the environment and human health that could arise from inappropriate waste handling. For more detailed information about recycling the product, users can contact their local council office or household waste disposal service.
Furthermore, fully depleted gas cells can be recycled. Users are encouraged to contact their local recycling center for more information on the safe disposal of these specific components. It is explicitly stated that ONLY fully depleted gas cells can be recycled, which is an important distinction for safety and environmental reasons. This comprehensive approach to disposal underscores the manufacturer's commitment to sustainability and responsible product lifecycle management.
For customer support in the UK, users can contact the Conair Customer Care Line for advice on using the BaByliss replacement energy cells. The customer care line operates from 09:00 to 17:00, Monday to Friday. Alternatively, users can send an email with their enquiry. The manual also provides a return address for customer care, indicating a structured support system for product-related queries and issues. This ensures that users have access to assistance and information whenever needed, enhancing the overall user experience and product reliability.
General| Product Type | Styling Iron |
|---|---|
| Model | 4580U |
| Brand | BaByliss |
| Plate Material | Ceramic |
| Plate Width | 25 mm |
| Maximum Temperature | 230°C |
| Cord Length | 2.5 m |
| Automatic Shut Off | Yes |
| Swivel Cord | Yes |
| Power | 50 W |
| Heat Up Time | 15 seconds |
