- 14 -
• The number ‘1’ will be displayed on the screen. It shows
you that you are in the session for user 1. The default
setting of 160cm (or the previously saved value) will
also appear for the height and will ash.
• Press on the up and down (‘2’ or ‘3’) buttons to select
your height. The numbers will scroll quickly if you
hold the button down. Once your height appears on
the screen, press user1 to conrm. Your height is now
saved. An audible beep conrms this.
• The scale shows your user number and displays ‘00.0
Kg’. It is ready to use.
Note: The scale turns itself o automatically after
5 seconds of non-use.
You have nished entering your personal data.
ERROR MESSAGES
The scale does not display your weight:
• The minimum measurable weight is 11 Kg.
The ‘err’ message may appear on your screen if:
• your weight exceeds the maximum measurable
weight 180Kg
• the dierence in your weight since your last weighing
exceeds 9.9 Kg
• you stepped onto the scale before ’00.0’ appeared.
The ‘lo’ message indicating a weak battery may appear
on the screen if:
• the battery is nearly empty. In this case, replace it
immediately.
REPLACING THE BATTERY
Your scale comes with a CR2032 3V lithium coin cell battery
To replace the battery:
• When the battery is empty, it should be discarded at
a recycling centre for the safety of the environment. If
the battery is leaking, avoid touching it and discard it
at a recycling centre.
• Insert a new battery of the same type. Place the bat
-
tery with the side marked with ‘+’ facing up.
To Next Page
Loading...