Maintenance
This product requires regular maintenance to ensure correct and safe performance.
Regularly inspect the wheels, locks, brakes, harness, catches, seat adjusters,
joints and fixings to ensure they are clean, secure and in full working order.
Replace tyres if they are excessively worn.
If parts become stiff or difficult to operate, ensure dirt is not the cause, then try
a light application of a silicon lubricant, ensuring it penetrates between the
components. Regular lubrication of moving parts will extend the life of your product
and make opening and folding easier.
Your stroller should be serviced and reconditioned before using for a second
baby, or within 18 months, whichever is sooner.
After exposure to damp conditions, dry off with a soft cloth and leave fully open
in a warm environment. Storing damp will encourage mildew to form. Store in a
dry place.
Do not leave in sunlight for prolonged periods - some fabrics may fade.
12 Care
Page 16
Cleaning
Plastic and metal parts may be sponged lightly using warm water and a mild
detergent.
Dry thoroughly before storing.
Removable and non-removable fabric covers may be hand washed or spot
cleaned. Use mild soap or upholstery shampoo. Wash separately. Do not bleach.
Dry in shade thoroughly before re-use and avoid direct heat and sunlight. Do not
iron. Do not dry clean .
Never clean any part of the product with abrasive, ammonia based, bleach
based or spirit type cleaners.
To Next Page
Loading...
