BACHARACH
®
| 1.800.736.4666 | www.bacharach-inc.com
11
Combustion & Environmental Analyzers
Probe P/N 19-7111
For Models 110 & 120
(With thermocouple)
Probe P/N 24-3004
For Models 125 and 105
(With replaceable
thermocouple)
* Requires optional thermocouple P/N 104-1798 or 104-1797.
** Each Fyrite
®
Pro that is equipped with Draft / Differential Pressure includes gas pressure
test tubing with barbed fitting for ease of appliance line and manifold gas pressure
measurement.
SPECIFICATIONS
Measurement Combustion Air/Ambient Air Temperature 32 - 212˚F (0-100˚C)
Ranges Flue Gas Temperature 0 - 999˚F (-18 to 537˚C)
Oxygen 0.0 to 20.9% O
2
Carbon Monoxide 0 to 2,000 ppm CO
Draft / Differential Pressure -10.0 to +27.0 in. WC
Calculated Combustion Efficiency 0.1 to 99.9%
Ranges Carbon Dioxide 0.1 to a fuel dependent
max. value in percent
Carbon Monoxide (air free) 0 to 9,999 ppm
Excess Air 0 to 400%
Selectable Natural Gas (F1)
Fuels Oil #2 (F2)
Propane (F3)
Kerosene (F4)
Power Four disposable AA alkaline batteries (included)
Battery Life Up to 18 hours of continuous operation
Size 7.5”H x 3.1”W x 2.1”D (19.0 cm x 7.9 cm x 5.3 cm)
Weight 16 oz. with batteries (0.45 Kg)
Warranty 2 years, including sensors
ORDERING INFORMATION
MODEL
P/N MEASUREMENTS CALCULATIONS ACCESSORIES
Model 105 Carbon Monoxide Probe/Hose Assembly
P/N 24-8202 **Draft Hard Carrying Case
**Differential Pressure
Model 110 Oxygen Combustion Efficiency Probe/Hose Assembly
P/N 24-8103 Flue Gas Temperature Excess Air Hard Carrying Case
Carbon Dioxide Protective Rubber Boot
Model 120 Oxygen Combustion Efficiency Probe/Hose Assembly
P/N 24-8104 Flue Gas Temperature Excess Air Hard Carrying Case
Carbon Monoxide Carbon Dioxide Protective Rubber Boot
CO (air free)
Model 125 Oxygen Combustion Efficiency Probe/Hose Assembly
P/N 24-8105 Flue Gas Temperature Excess Air Hard Carrying Case
Carbon Monoxide Carbon Dioxide Protective Rubber Boot
**Draft CO (air free) Probe Stop
**Differential Pressure * Delta Temperature
Combustion Air/Ambient Temp.
Model 125 Kit Oxygen Combustion Efficiency Probe/Hose Assembly
P/N 24-8205 Flue Gas Temperature Excess Air Hard Carrying Case
Carbon Monoxide Carbon Dioxide Protective Rubber Boot
**Draft CO (air free) IrDA Printer
**Differential Pressure * Delta Temperature Probe Stop
Combustion Air/Ambient Temp
Model 125 Oxygen Combustion Efficiency Probe/Hose Assembly
Delux Kit Flue Gas Temperature Excess Air Hard Carrying Case
P/N 24-8206 Carbon Monoxide Carbon Dioxide Protective Rubber Boot
**Draft CO (air free) IrDA Printer
**Differential Pressure * Delta Temperature True Spot
®
Test Kit
Combustion Air/Ambient Temp Probe Stop
PART NO. DESCRIPTION
24-1400 IrDA Printer with disposable batteries
24-1310 Printer paper, 5 roll package
06-8733 Printer paper, 1 roll package
21-7006 True Spot
®
Smoke Test Set
24-1127 Protective boot w/ magnet
24-7265 Replacement CO sensor
24-8106 Replacement O
2
sensor
104-1797 10 ft. thermocouple assembly (for primary air temp)
104-1798 1 in. thermocouple (for room air temp)
24-7059 Calibration kit (Less cal. gas)
51-1994 Calibration gas (100 ppm CO)
24-8214 Pressure Accessory Kit: Includes 44’ of tubing, one pitot tube, two static
pressure tips, one flexible copper tube & one 1/8 NPT gas valve fitting.
24-1267 Optional soft carrying case
07-1644 Filters for water trap / filter assembly, pack of 3
19-3265 Water trap / filter assembly (for 19-7110, 19-7111, 24-7266 and 24-3004 probe assembly)
24-1254 AC Adapter for use with instrument
24-1229 IrDA Printer with rechargable batteries
24-1243 Battery charger for printer 24-1229
24-1244 Replacement battery for printer 24-1229
24-8414 Thermocouple Replacement Kit, 12” probe assembly
SPARE PARTS AND ACCESSORIES
To Next Page
Loading...
