1. Before removing processed food, press the OFF button and wait for the
blade to stop spinning. Unplug the unit and then remove the lid by turning it
counter-clockwise. Never try to remove the lid and the
goblet together; this
can damage the food processor.
2. Be careful not to let the chopping blade fall out of goblet as you empty it.
To prevent the blade from falling out, carefully remove the blade by lifting
up on the plastic hub before attempting to pour out the processed food,
or hold the top of the blade in place with your finger while pouring out
processed food.
3. To
lift the goblet off of the motor base, turn the handle of the goblet
counter-clockwise and lift the
goblet straight up.
NOTE: Occasionally, a piece of food may become wedged between the blade
and the
goblet. If this happens, unplug the unit, remove the lid, lift the blade out
carefully and remove the wedged piece. Empty the
goblet, reinsert the blade,
replace the ingredients and lock the lid into place.
OPERATION
14
To Next Page
Loading...
