Backfire Zealot X - Board and Remote Pairing; Powering On;Off and Pairing Procedure; Customizable Wheel Setup Guide

POWER ON/OFF THE REMOTE AND BOARD
-DIY WHEEL SETUP SHEET
Hold the Power Button for 3 seconds to power ON/OFF the board.
When both the remote and board are in the OFF state, hold the Power Button on both the
board and remote at the same time for 3 seconds to pair.
*When the whole machine leaves the facto,
the default remote control has been paired with the skateboard
Auto-Pairing
Select 2WD
Wheel Size
96mm
105mm
Cloud wheel
120mm Cloud wheel
120mm PU wheel
2.6
2.6
2.8
3.1
7
7
7
7
Gear Ratio Pole Pairs
Select between KM and MILES using the Throttle
Wheel, and press the Power Button on the remote
to conrm your choice.
Select the drivetrain setup on your
board using the throttle wheel.
Select the wheel size of your board using
the throttle wheel.
[Between 90MM-200MM]
Select the gear ratio of your
drivetrain using the throttle wheel.
Select the number of Pole Pairs for your board's
motor conguration. [Between 2-26]
Pairing and conguration complete.
Searching
4WD
Drive Mode
2WD
KMMILES
Unit Selection
BELT
Motor Type
HUB
Motor Poles
7
9
86
5
Complete
Wheel Size
97
99
98
96
95
2.6
2.8
2.7
2.5
2.4
Gear Ratio