60 Mordaunt Circuit, Canning Vale 6155, WA . P: 1300 305 314 . F: 1300 826 188 . www.backsafeaustralia.com.au
7. Provision is made to disconnect the battery pack from the drive system in the event of an
emergency or where it is necessary to carry out maintenance. A red connector with pull
handle is located on the left side of the battery tray. Pull sharply on the handle disengage
the connector.
Image 2: Battery tray connections
The machine is equipped with a state-of-the-art transaxle incorporating integral differential
for superb manoeuvrability, as well as an automated braking system. The power available will
allow the machine to operate on slopes of up to 30 degrees and the advanced electronic
controller provides continuously variable speed, both in the forward and reverse direction.
Internal monitoring functions of the controller provide a visual indication of battery condition
and of any abnormal conditions that may be experienced (refer to the SELF HELP GUIDE).
A battery diagnostics connection list is provided for analysis of potential battery related
problems.
To Next Page
Loading...
Need help?
General
