Backyard Creations 259-5091 - Assembly Pages

5
ASSEMBLY
PREPARATION

and hardware as listed on page 4 of this manual. If any part is missing or damaged, do not attempt to assemble this
product. Contact customer service for replacement parts.


lhead 

1
Wheel AssemblyBaseWheel
AssemblyinBase
Hardware Used: 2 - Medium Bolts
1
2
3
2
Support BracketsBase
Support BracketsMedium Bolts
Support
Bracketsand into the Base.
Hardware Used: 3 - Medium Bolts
3
PostSupport Brackets
Support BracketsBase
align the holes in the bottom of the Post with the holes on the
Support BracketsLarge Bolts
PostSupport Bracket
Small Flange NutsLarge Bolts
-tighten initially then tighten with a wrench when all Bolts
have been inserted.
Hardware Used: 6 - Large Bolts

Contact us for assistance: cservice@welltraveled.net
Medium Bolts through holes. Finger-tighten bolts. Make sure
Wheel Assembly is parallel to Base, then fully tighten the Bolts.
NOTE: Sand box is pre-assembled to base. For best stability,
fill the sand box with sand.