Backyard Creations 259-5091 - Page 6

6
4
Place Cylinder Housing onto Post. Slide Cylinder Housing
Support BracketsPostBase
6
5
4
5
Reflector StudsScreen CoverReflector
Studs through Washers and into holes on screen cover.
Tighten Studs securely.
Hardware Used:
3 - Large Flat Washers
6
Small BoltsLock Washers
Head AssemblyHead AssemblyPostGas
HosepostHead Assembly
PostNote: Control knob should be above the decal on Post.
Head AssemblyPostboltslock
washersHead AssemblyPostBolts
Lock Washers
Hardware Used: 4 - Small Bolts
4
(Pr e-assembled in Head Assembly)
ASSEMBLY
Contact us for assistance: cservice@welltraveled.net