8
9
Connect the Hose and Regulator to the LP cylinder. The LP
cylinder only. Lift the Cylinder Housing and rest it on the top of
Support Brackets
Regulator
Cylinder Housing
NOTE: Use this heater only with a propane vapor withdrawal
supply system. See Chapter 5 of the standard for storage and
handling of liquefied petroleum gas, ANSI/NFPA 58. Your local
library or fire department should have this book.
9
and must not be stored in a building, garage, or any other enclosed area. The minimum permissible gas supply pressure of 11
automatic operation rating less than full input rating.
The pressure regulator and hose assembly supplied with the appliance must be used.
The cylinder must have a connection device compatible with
the connection for the appliance.
The cylinder used must include a collar to protect the
cylinder valve.
heater.
Do not store a spare LP-gas cylinder under or near
this appliance.
Place the dust cap on the cylinder valve outlet
whenever the cylinder is not in use. Only install
the type of dust cap on the cylinder valve that is
provided with the cylinder valve. Other types of
ASSEMBLY
Contact us for assistance: cservice@welltraveled.net
To Next Page
Loading...
