STEP 13
NOTE:
USE THIS PAGE TO FAMILIARIZE YOURSELF WITH THE ROOF PANEL & ASSIST YOU IN THE COMING STEPS.
WARNING:
GLOVES SHOULD BE WORN WHEN HANDLING ROOF PANELS; EDGES ARE SHARP.
• Note the pre-drilled holes on the top end of each sheet shown below. These holes will always go towards the ridge of the roof
and will be used to install the ridge cap in a later step. Assemble each roof panel by starting as shown below and working toward
the left as shown.
POSITION YOUR ROOF PANELS ON THE GROUND SO THEY MIRROR EACH OTHER AS SHOWN.
REMOVE PROTECTIVE BLUE FILM FROM PANELS.
* RIDGE *
ROOF PANEL STEPS 20-21
ROOF PANEL STEPS 11-12
30
To Next Page
Loading...
