FORT ASSEMBLY
STEP 35
NOTE:
BEFORE ATTACHING ROPE, ADD THREE
KNOTS EVENLY SPACED
INSERT THE ROPE END THROUGH
THE PRE-DRILLED HOLE. MEASURE
APPROXIMATELY 1 INCH UP FROM
THE ROPE END AND TIE A KNOT IN
THE ROPE TO SECURE.
INSERT THE ROPE END THROUGH
THE PRE-DRILLED HOLE.
PULL TIGHT AND TIE A
KNOT IN THE ROPE TO SECURE.
CLIMBING ROPE
(x1)
A6P00422
To Next Page
Loading...
