Backyard Products GABLE - SIDE WALL FRAMES ASSEMBLY; PARTS REQUIRED FOR SIDE WALL FRAMES; ASSEMBLING SIDE WALL FRAMES

Flush
Flush
35
2" (5 cm)
FRONT WALL PANELS
PARTS REQUIRED:
LEFT
RIGHT
x1
x24
x1
Pre-assembled
Pre-assembled
Primed Side UP
3
Your front wall is now assembled.
FINISH
Place wing wall panels onto frame with bottom of panels ush.
Secure wing wall assemblies with 2" nails spaced 6" apart.
Do not nail
in groove.
To draw panels tight
at seams angle nail.
DOOR
6"
(15,2 cm)
6"
(15,2 cm)
Use a 2x3"
for support.