BACtrack ELEMENT - Performing a Breath Alcohol Test; Understanding BACTRACK Error Notifications

8
STEP 5: Once the sensor has
analyzed the breath sample,
the estimated BAC value will
ash for about 10 seconds.
The BACtrack Breathalyzer will turn o automatically in 3
minutes. You can also turn o the breathalyzer during the
countdown by pressing and holding down (start button
symbol) for 3 seconds.
ERROR NOTIFICATION
If a user does not blow a
sucient breath sample,
the LCD will display “FLo”. Press
start to restart the countdown
cycle and retest.
If there is no breath sample
blown within 3 minutes, the
LCD will display “Out”. Press
start to restart the countdown
cycle and retest.
If the unit is powered on outside of
the acceptable temperature range
(0-40 °C or 32-104 °F) the unit will
display Out°F and testing cannot be
performed.
If the battery indicator display is
empty, install two new alkaline AAA
batteries.
8.8880.080
%BAC
8.888
%BAC
8.888
%BAC
8.888
%BAC
°
8.888
%BAC