EasyManuals Logo

Bad Boy WALK-BEHIND Series User Manual

Bad Boy WALK-BEHIND Series
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
PAGE 25
SPARK PLUG
CHANGING THE SPARK PLUGS AND CHECKING THE
SPARK PLUG GAP
1. In order to access the spark plugs it is
recommended to remove the rear engine cover.
This can be accomplished by removing the four
carriage bolts using a 1/2” ratcheting wrench.
2. Remove the wire on the spark plug and use an
appropriate socket to remove the spark plug.
3. Check the gap on the spark plug to verify that it is
0.03” by using a feeler gauge.
4. If the spark plug is worn, overheated, wet or
carbon fouled replace the spark plug.
5. Install the plug into cylinder head and torque to
engine manufacture specifications. Be careful not
to overtighten the spark plug.
Spark Plugs
Spark Plug
Spark
Plu
g
Wire

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Bad Boy WALK-BEHIND Series and is the answer not in the manual?

Bad Boy WALK-BEHIND Series Specifications

General IconGeneral
BrandBad Boy
ModelWALK-BEHIND Series
CategoryLawn Mower
LanguageEnglish

Related product manuals