Bad Boy WALK-BEHIND Series User Manual


PAGE 30

LEVELING THE DECK
1. Make sure that each tire is at 12PSI.
2. Remove pins from deck height
adjustment rods and raise or lower deck
to desired height by using the handles
located on each side of the deck.
3. Once the desired deck height is
achieved, replace the pins back in the
deck height adjustment rods making sure
that all four pins have the same number
of empty holes above and below.
4. Verify that the deck is level. A 1/4" pitch
is built into the deck.
Deck Height Pins
Deck Height Pins

Bad Boy WALK-BEHIND Series Specifications

General

Brand	Bad Boy
Model	WALK-BEHIND Series
Category	Lawn Mower
Language	English