Need help?Do you have a question about the Bad Boy Xtreme N and is the answer not in the manual?
Connect the antenna to the Xtreme device, ensuring finger-tight fit.
Configure jumpers on the Power Injector DUO to enable power on Port 2 for Unleashed devices.
Connect the Power Injector DUO to AC or DC power and verify LED indicators.
Select a suitable mounting location for the unit, considering height and obstructions.
Attach the mount using provided hardware, ensuring the antenna is vertical.
Measure and cut the Ethernet cable, considering routing to the Power Injector location.
Power the system and configure computer network settings for Wi-Fi connection.
Open a web browser and enter the Xtreme URL to access the login screen.
Select country, connect to a wireless hotspot, and configure security settings.
Verify connection progress and status on the Status tab after applying settings.
Troubleshoot issues when the LAN LED does not light up, checking power and connections.
Resolve browser errors by checking connection, URL, and Wi-Fi settings.
Diagnose and fix problems preventing access to the Xtreme management interface.
Address issues causing the LAN LED to blink rapidly, often related to Junction Box wiring.
Resolve problems where system settings are not saved, checking voltage and 'Apply' button usage.
Troubleshoot low signal strength by checking hotspot quality and antenna connection.
Details on customer name, purchase info, serial number, and problem description needed for support.
Mount Xtreme N using a 1-14 thread adapter for marine applications.
Mount Xtreme N or MJ on a boat's backstay using stainless steel hardware.
Add Unleashed N for a wireless hotspot, enabling cable-free connection for multiple devices.
To Next Page
General