BAE Audio 10DC - TECHNICAL SPECIFICATIONS; Performance Specifications; Compressor and Limiter Settings; Gain Make-Up and Physical Details

BAE 10DCF ©2017
2
BAE AUDIO – 10DCF
SPECIFICATIONS
FREQUENCY RESPONSE
5Hz to 45kHz -1dB Measured at +8dBu
NOISE
-80dBu with 200Ω source
MAXIMUM OUTPUT LEVEL
+33dBu into 10kΩ
+27dBU into 600Ω
DISTORTION
Varies from 0.03% to greater than 1%
COMPRESSOR THRESHOLD:
-20dBu to +16dBu with 2dB steps
RATIO:
1.5:1 to 10:1 with 6 position switch
ATTACK:
2mS to 80mS with 6 position switch
RECOVERY:
100, 200, 400, 800mS
Auto 1 100mS isolated peaks, 2 Sec prolonged levels
Auto 2 50mS isolated peaks, 5 Sec prolonged levels
LIMITER THRESHOLD:
+4dBu to +15dBu with 0.5 dB steps
ATTACK:
Slow 4mS, Fast 2mS
RECOVERY:
100, 200, 400, 800mS
Auto 1 100mS isolated peaks, 2 Sec prolonged levels
Auto 2 50mS isolated peaks, 5 Sec prolonged levels
GAIN MAKE-UP:
0 to +20dBu in 1 dB steps
OUTPUT IMPEDANCE
100Ω Balanced earth free
POWER CONSUMPTION
200mA at 24VDC
DIMENSIONS IN INCHES
19W x 1.75L x 9D (Rackmount)