Bahco BCL20IB - At the end of a working day; Tool Shutdown and Battery Management; Charging and Lubrication; Blade Sharpening

BCL20IB
4. At the end of a working day
Press trigger for a
few seconds to close
blades.
3 sec.
1 2
Switch off the tool.
3 4
Disconnect
the battery
.
Charge battery.
5 6
7
Clean cutting
head
.
Lubricate
cutting head
.
Sharpen the blade with
SHARP-X or LS CORINDON
.
x1
x5
x10
x1
SHARP-X
LS CORINDON
ENGLISH