SERVICE MANUAL
Welcome to your new Bailey Motorhome.
This Service Manual is a record of your
motorhome’s service history. It includes
technical information for your reference. It
should be read in conjunction with the
Motorhome Owner’s Manual.
Your motorhome is designed to give you many
years of use. However, regular maintenance is
necessary to ensure trouble-free usage. Your
Bailey retailer is equipped to offer service and
repair work facilities as well as supplying any
spare parts that you may require. All
enquiries regarding your motorhome should
therefore be addressed in the first instance to
the retailer from whom you purchased the
vehicle.
Manufactured by:
Bailey Caravans Limited,
South Liberty Lane, Bristol,
BS3 2SS
© Bailey of Bristol 2024. All rights reserved.
No part of this document may be reproduced
or transmitted in any form or by any means,
electronic or mechanical, for any purpose,
without the express permission of Bailey of
Bristol Ltd.
MOTORHOME SERVICE SCHEDULE
In order to validate the factory backed
warranty package, your motorhome must be
serviced by an approved Bailey Service Centre
every 12 months (or 6 weeks either side of the
anniversary of purchase) in accordance with
the NCC recommended service schedule.
A full listing of the current Approved Bailey
Centres can be found on the Retailer Network
pages of our website www.baileyofbristol.co.uk
Under no circumstance should the
body shell fixings be tampered with
or adjusted by the motorhome owner.
Any tampering or adjustment will
invalidate the warranty.
STANDARD MOISTURE SURVEY FOR ALU-TECH
CONSTRUCTION MOTORHOMES
A moisture survey must be carried out using a
calibrated moisture meter every 12 months by
an Approved Bailey Service Centre.
Readings should be obtained from the floor
section of the motorhome in positions where
the holes created by the meter’s probes are
not visible e.g. behind seals, in bed boxes or in
cupboard bases. It is important to make sure
that the probes are free of moisture and the
surface of the floor is free from condensation.
Readings below 20% are considered
acceptable. Readings greater than 20% will
identify areas that need further investigation
and possible remedial work.
All other parts of the body of an Alu-Tech
motorhome should be checked visually for
moisture ingress.
THERMAL INSULATION GRADE
All Bailey Alu-Tech Motorhomes are
manufactured and approved by the NCC to
EN1646-1 thermal insulation and heating
classification Grade 3. This has been approved
using the motorhome space heater or Alde
wet system using both the electric and gas
combined as the heating method.
Grade 3 is classified as being able to achieve
an average temperature difference of 35 °C
between the inside of the motorhome and the
outside temperature when the outside
temperature is -15°C.
REPAIRS
Repairs to the AL-KO AMC components
including the axle assembly may only be
carried out by specialist workshops.
1
To Next Page
Loading...
