BainUltra MIA Series User Manual

OWNER’S MANUAL
IMPORTANT INFORMATION FOR THE INSTALLER
AND THE OWNER
INCLUDED: THERMOMASSEUR
TM
INSTALLATION
USING THE MIA
TM
SERIES CONTROLS
USING THE EUPHONIA
TM
SYSTEM
IMPORTANT: TO BE KEPT FOR THE OWNER
The quest for your wellness
™

BainUltra MIA Series Specifications

General

Category	Control Unit
Frequency	60 Hz
Display	LCD
Programmable Settings	Yes
Series	MIA
Voltage	120V

Summary

Thermomasseur Safety Instructions

DANGER

Hazards related to use by children, impaired people, and entry/exit care.

ELECTRICAL CONNECTIONS

Requirements for circuit protection, wire gauge, grounding, and installation by certified electricians.

CAUTION: RISK OF ELECTRICAL SHOCK

Precautions for servicing and keeping appliances away from the Thermomasseur.

WARNING

Risks of hyperthermia, drowning, fetal injury, accidental injury, and general warnings.

Thermomasseur Parts and Tools

A. PARTS AND TOOLS

Lists general parts and tools required for installation.

TILE FLANGE INSTALLATION

Lists tools for tile flange installation.

MOLDED TILE FLANGE INSTALLATION

Lists tools for installing molded tile flanges.

OTHER NECESSARY ITEMS

Lists additional items like wood shims and silicone.

Thermomasseur Site Preparation

FAUCET INSTALLATION

Refers to faucet manufacturer for specifications and drain position.

BEDDING

Floor support requirements and concrete bedding recommendations.

SERVICE ACCESS AND VENTILATION

Minimum dimensions for service access and air vent for turbine.

REMOTE MOUNTING

Refers to the TURBINE section for remote mounting recommendations.

Thermomasseur Installation

1. ALCOVE INSTALLATION (BETWEEN 2 OR 3 WALLS)

Step-by-step guide for installing the bath in an alcove.

1. ALCOVE INSTALLATION (BETWEEN 2 OR 3 WALLS) (NEXT)

Instructions for supporting the bath deck and installing skirt supports.

Thermomasseur Tile Flange Installation

TILE FLANGE

Recommendation for alcove installations and types of tile flanges.

2. TILE FLANGE INSTALLATION

Steps for cutting, taping, and applying tile flanges.

Thermomasseur Plumbing Installation

DRAIN, OVERFLOW, AND PLUMBING

Requirements for drain and overflow sets for different models.

DRILLING ACRYLIC OR LYPTUS WOOD FOR FAUCETS

Guidelines for drilling acrylic or wood for faucet installation.

LEAK TEST

Procedure for testing plumbing installations for leaks.

1. DRILLING

Steps for drilling holes using a guide hole and hole saw.

Bath on Deck Plumbing Installation

1. INSTALLATION

Steps for preparing the site, building structure, and securing plywood.

Undermounted Bath Plumbing Installation

1. INSTALLATION

Steps for site preparation, structure building, and securing the bath.

Tekura Armrest Installation

1. INSTALLATION

Steps for loosening screws, removing, and installing new armrests.

Tekura Headrest Installation

1. INSTALLATION

Step for setting the headrest onto the upper part of the backrest.

Tekura Legrest Installation (6636 1-Person)

1. INSTALLATION

Steps for loosening suction cups and attaching legrests.

Tekura Legrest Installation (7242 2-Person)

1. INSTALLATION

Steps for loosening suction cups and attaching legrests for both seats.

Balneo, Ayoura & Amma Freestanding Parts and Tools

A. PARTS INCLUDED

Lists parts included for freestanding models.

B. TOOLS REQUIRED

Lists tools required for freestanding model installation.

Balneo, Ayoura & Amma Freestanding Site Preparation

BEDDING

Floor leveling and recess requirements for specific models.

SERVICE ACCESS AND VENTILATION

Space requirements for turbine access and ventilation.

Balneo, Ayoura & Amma Freestanding Plumbing

PLUMBING

Flexible pipes for connections and faucet installation guidelines.

Ayura Freestanding Installation

1. BATH SITE

Steps for preparing the bath site and placing the template.

2. INSTALLATION

Steps for installing the bath, connecting plumbing, and wiring.

Ayura Freestanding Massage Table (Optional)

3. MOUNTING

Steps for mounting cushions and securing safety anchors.

4. UNMOUNTING

Steps for unmounting cushions and storing supports.

Amma Freestanding Installation

1. BATH SITE

Steps for preparing the bath site and placing the template.

2. INSTALLATION

Steps for mounting the drain, positioning the bath, and connecting utilities.

Balneo Cella Installation

1. BATH SITE

Steps for determining location and drilling holes for feet, drain, and air intake.

2. INSTALLATION

Steps for installing drain, overflow, air intake pipe, and securing feet.

Balneo Naos & Sanos Installation

1. BATH SITE

Steps for determining location and tracing outline, and noting air intake pipe height.

NOTES

Notes about factory-drilled overflow drain and drilling for air entry.

Balneo Naos & Sanos Installation (Continued)

2. INSTALLATION

Steps for installing drain, overflow, air intake pipe, applying silicone, and positioning bath.

Turbine Technical Specifications

MOTOR

Specifications for motor weight, power, air pressure, flow, speed, and noise.

AIR HEATER

Specifications for air heater power and operating cost.

Turbine Electrical Installation

GROUNDING

Requirements for grounding, circuit protection, and wire caliber for turbine.

CONNECTIONS

Instructions for connecting InMix module and turbine to power circuit.

Turbine Electrical Installation (Continued)

MIATM, MIAPLUSTM, MIAMULTITM

Connections for controls for different series.

Turbine Electrical Diagram

ELECTRICAL DIAGRAM

Diagram showing electrical connections for Canada.

Turbine Remote Mounting Installation

LOCATION

Guidelines for choosing a location for relocating the turbine and InMix module.

TURBINE INSTALLATION

Instructions for turbine relocation, pipe types, and mounting height.

Turbine Remote Mounting Procedure

A. TO REMOVE TURBINE FROM ITS PRESENT SUPPORTS

Steps to disconnect wires and loosen fittings for turbine removal.

B. TO REINSTALL TURBINE

Steps to mount turbine, connect pipes and wires, and secure power supply.

Amma Series Turbine Removal

A. TO REMOVE TURBINE FROM ITS PRESENT SUPPORTS

Steps to disconnect wires, loosen fittings, remove pipes and air-heater.

Amma Series Turbine Reinstallation

B. TO REINSTALL TURBINE

Steps to insert air-heater, mount turbine, connect pipes, and ensure air heater connection.

Amma Series Turbine Installation Example

EXAMPLE OF INSTALLATION IN AN ADJACENT SPACE

Requirements for turbine placement and space ventilation in an adjacent closet.

Skirt General Instructions

SIZING ACRYLIC PARTS

Steps for sizing acrylic skirt parts if necessary.

PEEL COAT

Advice on handling the protective film on acrylic parts.

1. SIZING ACRYLIC

Steps for protecting, tracing, and cutting acrylic parts.

Skirt Parts and Tools

A. NECESSARY TOOLS AND PARTS REQUIRED (NOT INCLUDED)

Lists general tools and parts needed for skirt installation.

FOR TRIMMING (IF NEEDED)

Lists tools for trimming skirt parts.

AMMA CR 6060 AND LITTORA

Lists specific parts/tools for Amma and Littora models.

SJ-1 MODEL

Lists specific parts for SJ-1 model.

S-J 3 CN2K/CR2K MODELS

Lists specific parts for S-J 3 CN2K/CR2K models.

SJ-3 TM/SE MODELS

Lists specific parts for SJ-3 TM/SE models.

SJ-3 TMU 5454/6060 MODELS

Lists specific parts for SJ-3 TMU 5454/6060 models.

ELEGANCE

Lists specific parts for Elegance model.

Amma CR 6060 Skirt Installation

1. PARTS INCLUDED

Lists parts included for Amma CR 6060 skirt.

2. INSTALLATION

Steps for gluing wooden blocks and installing retainer clips.

Amma CR 6060 Skirt Installation (Continued)

2. INSTALLATION (NEXT)

Steps for tracing guide lines, positioning toe kick, and aligning wall finishing strip.

Amma CR 6060 Skirt Installation (Continued)

2. INSTALLATION (NEXT)

Steps for positioning skirt, marking holes, and securing lower anchorage.

Elegance & Littora Skirt Installation

1. PARTS INCLUDED

Lists parts included for Elegance & Littora skirts.

2. INSTALLATION

Steps for gluing wooden blocks and installing retainer clips.

Elegance & Littora Skirt Installation (Continued)

2. INSTALLATION (NEXT)

Steps for tracing guide lines, positioning toe kicks, and marking horizontal lines.

Elegance & Littora Skirt Installation (Continued)

2. INSTALLATION (NEXT)

Steps for aligning and securing wall panels, mounting lower anchorage, and tightening bolts.

Elegance & Littora Skirt Installation (Continued)

2. INSTALLATION (NEXT)

Steps for tightening bolts on the center panel to ensure alignment.

SJ-1 Skirt Installation

1. PARTS INCLUDED

Lists parts included for SJ-1 skirt.

2. INSTALLATION

Steps for gluing wood blocks and positioning them according to bath model.

SJ-1 Skirt Installation (Continued)

2. INSTALLATION (NEXT)

Steps for marking guidelines, installing retainer clips, and fastening toe kicks.

SJ-3 CN2K & CR2K Skirt Installation

1. PARTS INCLUDED

Lists parts included for SJ-3 CN2K & CR2K skirts.

2. INSTALLATION

Steps for gluing wood blocks and following SJ-1 skirt section.

SJ-3 CN2K & CR2K Skirt Installation (Continued)

2. INSTALLATION (NEXT)

Steps for installing toe kick, retainer clips, and positioning skirt brackets.

SJ-3 SE Skirt Installation

1. PARTS INCLUDED

Lists parts included for SJ-3 SE skirt.

2. INSTALLATION

Steps for gluing wood blocks and positioning them according to bath model.

SJ-3 SE Skirt Installation (Continued)

2. INSTALLATION (NEXT)

Steps for holding level, marking dashes, positioning center toe kick, and screwing it to floor.

SJ-3 SE Skirt Installation (Continued)

2. INSTALLATION (NEXT)

Steps for inserting panels, seating brackets, adjusting panel height, and ensuring bracket seating.

SJ-3 TMU 5454/6060 Skirt Installation

1. PARTS INCLUDED

Lists parts included for SJ-3 TMU 5454/6060 skirts.

2. INSTALLATION

Steps for screwing upper brackets and following SJ-1 skirt section.

SJ-3 TMU 5454/6060 Skirt Installation (Continued)

2. INSTALLATION (NEXT)

Steps for aligning toe kicks, screwing them to floor, and screwing lower brackets.

SJ-3 TMU 5454/6060 Skirt Installation (Continued)

2. INSTALLATION (NEXT)

Steps for hooking center panel, tightening screws, repeating for side panels, and leaving space for air intake.

Basa Duo Skirt Installation

1. INCLUDED PARTS

Lists parts included for Basa Duo skirt.

2. INSTALLATION

Steps for inserting upper skirt part and adjusting skirt height using wing nuts.

Mia & MiaPlus Controls Installation

REQUIRED TOOLS

Lists required tools for control installation.

LOCATION

Guidelines for choosing the most convenient location for the control module.

DRILLING

Refers to drilling template for hole location and diameter.

INSTALLING THE TOUCHPAD

Steps for pushing wiring, removing film, securing touchpad, and tightening.

Mia Control User Guide

ON/OFF

How to start or stop the turbine and control panel.

ADJUST AIR JET PRESSURE

How to adjust air jet pressure for comfort.

TO ACTIVATE THE DRYING CYCLE

How to activate the drying cycle for conduit hygiene.

MiaPlus Control User Guide

KEYS AND FUNCTIONS

Explanation of control panel keys and navigation.

MAIN FUNCTIONS

Lists main functions like massage, duration, chroma, sound, etc.

MiaPlus Control User Guide (Continued)

CHROMA (NEXT)

How to choose colors and activate scan mode for chromatherapy.

SOUND THERAPY – EUPHONIA™ SYSTEM (OPTION)

How to access and control the Euphonia system for sound therapy.

MiaPlus Control User Guide (Continued)

SOUND (NEXT)

How to play music, use next/previous functions, and adjust volume.

MiaPlus Control User Guide (Continued)

SOUND (NEXT)

How to select playlists and music modes (shuffle, repeat, continuous).

MiaPlus Control User Guide (Continued)

SOUND (NEXT)

How to select audio source, activate/deactivate speakers, and adjust equalizer.

MiaPlus Control User Guide (Continued)

BACKREST

How to select and adjust heated backrest temperature.

MiaPlus Control User Guide (Continued)

CARE

How to vary air jet intensity for different massage types.

SAVE

How to save personalized user presets and settings.

MiaPlus Control User Guide (Continued)

DRYING CYCLE

How to drain conduits and dry them for hygiene.

Select After Bath

How to program the drying cycle start time after a bath.

MiaPlus Control User Guide (Continued)

DRYING CYCLE (NEXT)

How to select daily drying time or after-bath drying delay.

MiaPlus Control User Guide (Continued)

LOCK

How to lock the control system to prevent accidental use.

CONTRAST

How to control the brightness of the display screen.

MiaPlus Control User Guide (Continued)

CONTRAST (NEXT)

How to set display screen contrast and access the function quickly.

LANGUAGE

How to select the display language for the control panel.

Miamulti Remote User Guide

REMOTE - HYDRO-THERMO MASSAGE FUNCTIONS (GREY KEYS)

Description of remote keys for hydro-thermo massage functions.

Miamulti Remote User Guide (Continued)

REMOTE - EUPHONIA™ SYSTEM FUNCTIONS (BLUE KEYS)

Description of remote keys for Euphonia system functions.

Euphonia System MP3 Player Installation

INSTALLING THE MP3 PLAYER

Steps for cutting wall, drilling holes, and mounting the MP3 player.

CONNECTING MP3 PLAYER TO THE TURBINE

How to connect MP3 player cable to the bath turbine.

CONNECTING CHROMATHERAPY MODULE

How to connect the chromatherapy module cable to the box.

Euphonia System Installation (Continued)

CONNECTING ELECTRICAL POWER SUPPLY

How to plug in the power supply module and connect wires.

CONNECTING A PERMANENT EXTERNAL SOURCE

How to connect an external analog source like a sound system.

Euphonia System Installation (Continued)

CONNECTING A TEMPORARY AUXILIARY EXTERNAL SOURCE

How to connect other external sources using a 3.5mm jack.

INSERTING THE SD MEMORY CARD

Instructions for inserting the SD memory card into the MP3 player.

Euphonia System User Guide

BEFORE THE FIRST USE

Steps for synchronizing headset with MP3 module.

FOR FOLLOWING USES

Instructions for turning on the headset and detecting MP3 player.

OPERATING THE MP3 PLAYER

LED indicators for MP3 player status (flashing, lit, off).

Euphonia System User Guide (Continued)

ADJUSTING THE VOLUME

How to raise or lower headset volume using +/- keys.

AUTOMATIC HEADSET SHUTDOWN

Automatic headset shutdown when MP3 player is off.

MANUAL HEADSET SHUTDOWN

Manual procedure to turn down volume and shut down headset.

RECHARGING HEADSET

Instructions for recharging the headset using the provided charger.

Euphonia System User Guide (Continued)

USING AN SD CARD (NOT INCLUDED)

System compatibility with MP3/WMA, SD card usage for music.

ORGANIZING MUSIC

Guidelines for organizing music files by folder on the SD card.

OPTIONAL ACCESSORIES

List of optional accessories like SD card readers and audio jacks.

Bath Maintenance

ACRYLIC

Technical info, cleaning with mild non-abrasive products, and safety for tough stains.

ACRYLIC (MINOR REPAIRS)

Using polishing putty for minor surface damage.

Bath Maintenance (Continued)

ACRYLIC (DEEPER SCRATCHES)

Sanding deeper scratches and finishing with polishing putty.

ACRYSTAL™ MYBODYREST™ COMPONENTS (FOR TEKURATM)

Maintenance for Acrystal components similar to other acrylic parts.

CABREUVA WOOD MYBODYREST™ COMPONENTS (FOR TEKURATM)

Treatment and cleaning of Cabreuva wood components.

CEDAR WOOD (TMU 5454/6060)

Protection and finish of cedar wood components.

Bath Maintenance (Continued)

CEDAR WOOD (TMU 5454/6060) NEXT

Protecting wood finish, cleaning, and avoiding abrasive products.

LYPTUS WOOD (AYOURA)

Technical info and maintenance for Lyptus wood components.

MASSAGE TABLE

Technical info and maintenance for massage table vinyl, wood, and polyurethane.

Troubleshooting

SITUATION

Lists common situations like bath not starting or breaker tripping.

SOLUTIONS

Provides solutions for troubleshooting common bath issues.

Troubleshooting (Continued)

SITUATION

Situations like cool air jets or non-working LEDs.

SOLUTIONS

Provides solutions for cool air jets and LED issues.

Troubleshooting (Continued)

SOLUTIONS

Detailed steps for replacing an LED if it does not work.

BainUltra Limited Warranty

LIMITED WARRANTY

General terms and coverage periods for various product components.

EXCLUSIONS

Conditions and damages not covered by the limited warranty.

BainUltra Limited Warranty (Continued)

PROCEDURE

Procedure for reporting defects and handling warranty claims.

LIMITATIONS

Limitations of the warranty, replacing other warranties.

LEGAL RIGHTS

Specific legal rights granted by the warranty.

Mia Drilling Templates

IMPORTANT

Note that the drawing is to scale.

Drawing of Mia Control hole

Diagram showing dimensions for the Mia control hole.

MiaPlus & Miamulti Drilling Templates

IMPORTANT

Note that the drawing is to scale.

Drawing of MiaPlus and MiaMulti control hole (same template).

Diagram showing template for MiaPlus and MiaMulti control holes.

Drawing of IR hole for MiaMulti

Diagram showing dimensions for the IR hole for MiaMulti.