Bajaj Storage Water Heater User Manual

bajaj electricals limited Page 6 of 8
6. It takes time for the water to get heated. Therefore, switch ON the unit well in advance before use. The
Heater unit can always be kept ON. Insulation keeps the water hot and thermostat makes sure that the
electric supply is alternately switched ON and OFF.
7. Every once in a while, check the working of the neon lamps to make sure that the thermostat and thermal
cut-out are working properly.
8. The red neon lamp glows ON when i) the thermostat fails OR ii) water temperature reaches
boiling point OR iii) the heater unit is operating without water. This indicates that the thermal
cut-out has operated thereby switching OFF the main power supply to the unit. In such a case
contact the nearest Bajaj sales or service centre.
9. The power supply to the Heater can be kept ON continuously. But it is advisable to switch it OFF when the
unit is not in use for a long time to save on electricity.
Bajaj Storage Water Heater Performance Parameters as Per BIS
Model Capacity
(in litres)
Element Rating (in
KW)
Min. Hot Water
Output (at
o
C)
Reheating Time
(in minutes)
Mixing Factor
(%)
Powder Coated Vertical Models
EE 6 6 3.0 50
o
9 30
EE 10 10 3.0 50
o
10 30
EE 15 15 2.0 50
o
20 30
EE 25 Dwarf
25 2.0 50
o
35 30
EE 25 25 2.0 50
o
35 30
EE 35 35 2.0 50
o
40 30
EE 15
Designer
15 2.0 50
o
20 30
EE 25
Designer
25 2.0 50
o
35 30
Powder Coated Horizontal models
EE 15 15 2.0 50
o
25 30
EE 25 25 2.0 50
o
40 30
EE 35 35 2.0 50
o
40 30
Stainless Steel Vertical Models
EE 15 15 2.0 50
o
20 30
EE 25 Dwarf
25 2.0 50
o
35 30

Bajaj Storage Water Heater Specifications

General

Brand	Bajaj
Model	Storage Water Heater
Category	Water Heater
Language	English