BAK BAKFlip G2 User Manual

Any damaged or missing parts?
INSTALLATION SHEET
Parts will be shipped to you directly. Call 844-779-8986
Mon - Fri 8:30 am - 7 pm EST or email support@bakindustries.com
1
2
Make sure the
clamp is inserted
all the way up
into the rail and
clamp teeth are
alinged to rail
slots to ensure
a secure grip.
3
Make sure
the rail is
clamped
square as
shown.
Start at the
front, and
place the
first clamp
approx 6 to 9
inches back.
4
Close tailgate.
Place BAKFlip rail
on truck bed with
silver bracket all
the way forward
and toward the
center of bed as
shown. Refer to
enclosed Spacing
& Shimming Sheet
for more details.
Rails should be
completely level.
If the truck does
not have a drop
in bedliner, install
the cab/bulkhead
seal (weather
strip). Wipe paint -
ed surface with
isopropyl alchol
before applying.
If the truck has a
drop in bedliner,
no seal will be
needed.
NOTE: Some drop in liners may require trimming
in the corners to fit the rail in the opening.
TOOLS RECOMMENDED
9/16 Wrench or socket
7/8 Drill bit & drill (optional)
Philllips screwdriver
SELECT SYSTEMS ONLY! (not pictured)
8 x Angle shims
2 x Spacer shims
•
1 HARDWARE BAG INCLUDING
•
6 x Clamps (8’ ft trucks incl.
8 ea)
•
2 x Elevator bolt (w-large
flat head)
•
4 x Rubber washers
•
2 x Large flat washers
•
2 x Lock washers
•
2 x Star knobs (thumb screws)
•
2 x Buckle ends
•
4 x Machine screws
•
4 x Threaded posts
PARTS INCLUDED IN YOUR KIT
•
1 x Hard folding cover assembly
•
3 x D Shaped cab bumpers
•
1 x Bulkhead seal
(¾ x ¾ x truck width)
•
1 Pair rails (L&R)
•
•
•
2 x Drain hoses
2 x Prop rods
2 x Prop rod clips
• 1100 N. Glenstone Ave. Suite 140, Springfield, MO 65802 • 844-779-8986 • bakindustries.com Part# 318A0029 Rev. 1.8.2020BAK Industries
Laurmark Enterprises, Inc., 2020
•

BAK BAKFlip G2 Specifications

General

Material	Aluminum
Finish	Matte Black
Weight Capacity (Evenly Distributed)	300 lbs
Installation Type	Clamp-on
Installation	Clamp-on, no drilling required
Bed Access	Full bed access when folded up
Water Resistance	Water resistant but not waterproof
Security	Lockable with tailgate lock
Weather Resistance	Yes, designed for all weather conditions
Warranty	3-Year Warranty
Type	Hard Folding Tonneau Cover
Compatibility	Fits most full-size and mid-size trucks

Summary

Tonneau Cover Positions While Operating Vehicle

CLOSED POSITION

Explains how to secure the tonneau cover in the closed position for safe driving.

FOLDED UP POSITION

Details securing the cover in the folded-up position, referencing storage clip.

FLIPPED UP POSITION

Instructions for flipping the cover up and securing it with prop rods.

Additional Important Operating Tips

Pre-Opening Checks

Bed must be free of foreign material like snow and ice before opening panels.

Driving Precautions

Do not tow the vehicle with the bed cover on. Do not operate with objects on top of cover.

Warranty

CARE AND MAINTENANCE

Cleaning the Top (Washing)

Standard washing with soap and water, avoid harsh cleaners or abrasives.

Treating the Vinyl Top

Use 303 Aerospace Protectant for vinyl top protection against fading and UV rays.

Maintenance

Periodically check cover security and mounting bolts; adjust as needed for vibrations.

Lubricating the Latches

Lubricate latches with silicone spray to ensure smooth operation and prevent sticking.