BAKCOU.COM
PUTTING ON PEDALS
16. Remove pedals from “Tool Kit” box.
17. Dierentiate the right pedal from the left pedal by locating the
small “CR-L” (for the left) and “CR-R” (for the right) inscribed on
the bolt of the pedal. (See Picture)
18. Attach right pedal by screwing into right crank in a clockwise
pattern using 15mm wrench. (Note: It is recommended that you
use a medium grade Loctite to ensure bolt does not loosen)
19. Attach left pedal by screwing into left crank in counterclockwise
pattern using 15mm wrench. (Note: It is recommended that you
use a medium grade Loctite to ensure bolt does not loosen)
20. Make certain crank bolts are tightened using 10mm
Allen wrench
To Next Page
Loading...
