Need help?Do you have a question about the Bakcou Mule and is the answer not in the manual?
General| Load Capacity | 300 lbs |
|---|---|
| Motor | Bafang 750W |
| Battery | 48V |
| Frame | 6061 aluminum alloy |
| Suspension | Front suspension fork |
| Brakes | Tektro hydraulic disc brakes |
| Display | Bafang |
| Range | Up to 40 miles |
| Top Speed | 28 mph |
Follow steps 1-7 for careful removal of bike and accessories from the box, ensuring all components are present.
Secure handlebars to the stem using screws, ensuring proper positioning of brake levers and throttle for comfort.
Mount the front fender and headlight to the front fork bracket using provided hardware and specified wrenches.
Install the front wheel by positioning it in the fork, ensuring the brake rotor aligns with the pads, and reinstall the thru axle.
Attach the right and left pedals to the cranks using the correct threading direction and specified tools, securing with Loctite.
Ensure all bolts are tight, understand battery charging and insertion procedures, and check for initial secure fastening.
Perform minor adjustments for rider fit, and understand settings for suspension dampeners and derailleur.
Consider tire liners, perform routine maintenance, wear protective gear, and obey traffic laws for safe operation.
Turn on the bike's battery by pressing the designated battery button.
Activate or deactivate the bike's display by holding the power button on the control pad for 3 seconds.
Shut down the bike's battery system by holding the battery button for 3 seconds.
To Next Page
