Baker A - Machine Specifications; Dust Connection and Power

12
MACHINE SPECIFICATIONS Baker A / AX Band Resaw.
 BandWheels:CNC‐machined,dynamicallybalanced28in.(71cm)allsteelwheels.
 Guides:BakerLowProfileFlatGuideswithsteelguideplates.
 Blades:
o Baker“A”:13’‐2”x1”x0.035”or13’‐2”x1¼”x0.035”hardback
o Baker“AX”:14’‐2”x1”
x0.035”or14’‐2”x1¼”x0.035”hardback
 BladeTensioning:Mechanical,spring
 MachineDimensions:
o Height:68in.(1.73m)
o Length:84in.(2.13m)
o Width:84in.(2.13m)
o Weight:
 Baker“A”:Approx.1,750lbs.(794kg)
 Baker“AX”:Approx.2,000
lbs.(907kg)
 DustConnection:4in.(102mm)diameter,600CFMrequired
 (optional)PoweredHold‐downSystem:Top‐mounted,holdingpointattheblade.Five(5)in.diametersolid
polyolefinheavy‐dutywheels.
Power
 MainDriveMotor:“A”:20‐HP(15kw)TEFC“AX”:30HP(22kw)TEFC
 FeedworksandConveyors:Hydraulicmotordrivenbymainmotor/mainengine.
 Electrical:Completelyprewired.NEMA12enclosurewithdisconnect,starter,andcircuitoverloadprotection.
AllVoltagesareavailable.(SeePage7ForYour
Machine)