Baker A User Manual

9
RULES FOR SAFE OPERATION
The purpose of safety symbols and signage is to draw your attention to real or possible
hazardous conditions that may exist when operating this equipment. Please remember that
safety symbols and signage alone do not eliminate danger and are not substitute for proper
training and education regarding operational hazards.
SAFETY EXPECTATIONS FOR OPERATING POWER EQUIPMENT
ALWAYS…
 ENSURE THAT TRAINED PERSONNEL OPERATE, MAINTAIN AND REPAIR THIS EQUIPMENT
 TURN
POWER OFF AND LOCKOUT / TAGOUT PRIOR TO PERFORMING MAINTENANCE
 KEEP WORK AREA CLEAN AND WELL LIGHTED TO MINIMIZE OR ELIMINATE HAZARDS
 KEEP
CHILDREN AND VISITIORS AWAY FROM OPERATING EQUIPMENT
 OPERATE
THE EQUIPMENT AT THE RATE IT WAS DESIGNED FOR
 KEEP
GUARDS IN PLACE WHEN OPERATING EQUIPMENT
 REMOVE
TOOLS BEFORE RESUMING OPERATION
 USE
PROPER EXTENSION CORD
 WEAR
PROPER APPAREL AND AVOID LOOSE CLOTHING AND ACCESSORIES THAT COULD GET
CAUGHT IN MOVING PARTS

ALWAYS WEAR SAFETY GLASSES AND HEARING PROTECTION

AVOID “KICK-BACK” BY KNOWING WHAT CONDITIONS CAN CREATE IT

CHECK DAMAGED PARTS AND REPAIR OR REPLACE THEM IMMEDIATELY
NEVER…
 LEAVE MACHINERY RUNNING OR UNATTENDED, ALWAYS TURN POWER OFF
 OPERATE
EQUIPMENT WHEN TIRED, FATIGUED OR UNDER THE INFLUENCE OF DRUGS OR
ALCOHOL

ALLOW UNTRAINED PERSONNEL TO OPERATE, MAINTAIN OR REPAIR THIS EQUIPMENT
This symbol and warning indicates a potentially hazardous
situation, which, if not avoided, will result in death or serious injury.
This symbol and warning indicates a potentially hazardous
situation, which, if not avoided, could result in death or serious
injury.
This symbol and warning indicates a potentially hazardous
situation, which, if not avoided, may result in minor or moderate
injury.
This warning provides notice and instruction regarding a potentially
hazardous situation, which, if not avoided will result in serious injury
o
r
deat
h.

Baker A Specifications

General

Brand	Baker
Model	A
Category	Industrial Equipment
Language	English