Baker GRUDGEBOX - WHATS INCLUDED IN MY KIT?; Gearset and Shift System Components; Bearings, Seals, and Gaskets; Installation Tools

PV4-118310
PAGE 5
GrudgeBox gearset w/ shift system
5/16”-18 SHCS, stainless, 73497
Washers, stainless, 6100
Shifter pawl, 555-GB-A
Shifter pawl washer, 6497HW
Shifter pawl retaining ring, 68010
Shifter pawl seal, 37101-84B
Countershaft bearing, 8963
Tapered roller bearing, HR32910J
Tapered roller bearing adapter, 11610-GB
Pulley spacer w/ O-ring, 33334-GB | OR568M52
Main drive gear seal, 12074-67
85mm beveled internal retaining ring, VHO-334STPA
.102” bearing spacer, 11615-GB, white (shown)
.104” bearing spacer, 11620-GB, green (pre-installed)
.106” bearing spacer, 11625-GB, blue (shown)
WHAT’S INCLUDED IN MY KIT?
Bearing door gasket, 35654-67
Top cover gasket, 34917-06-F (shown)
25700453 (M8)
Side cover gasket, 36805-06-F
Speed sensor spacer, 132-56R
Bearing adapter installation cup, T855-GB
Inner primary bearing, P205PP-H
Inner primary bearing seal, 25X52X07ADL
Side cover emblem, EMBLEM-GB