EasyManua.ls Logo

BALAY 3TS384XT - Starting the Programme; Changing the Activated Programme End Time; Soaking Laundry; Adding Laundry

BALAY 3TS384XT
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
operation en
31
13.8 Starting the programme
Requirement:A programme is set.
→"Setting a programme", Page29
Press Inicio/Pausa + carga.
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows the programme
duration or the programme end
time.
a After the programme has ended,
the display shows: End.
13.9 Changing the activated
programme end time
You can repeatedly change the set
and activated programme end time
before starting the programme.
Requirements
¡ The programme is set.
→"Setting a programme", Page29
¡ The programme end time is set
and activated.
→"Buttons", Page23
1. Press Inicio/Pausa + carga.
The activated programme end time
is paused.
2. Press Progr. diferida until the dis-
play shows the required pro-
gramme end time.
3. Press Inicio/Pausa + carga.
The changed programme end time
is activated.
13.10 Soaking laundry
Note:No additional detergent is re-
quired. The washing solution is then
used for washing.
1. Start the programme.
2. To pause the programme, after ap-
prox. 10 minutes, press Inicio/
Pausa + carga.
3. To resume the programme, after
the desired soaking time, press
Inicio/Pausa + carga.
13.11 Adding laundry
After the programme starts, you can
remove or add laundry depending on
the programme status.
1. Press Inicio/Pausa + carga.
The appliance pauses.
Note:If you want to add laundry,
follow the instructions on the dis-
play.
→"Display", Page22
2. Open the door.
3. Add or remove laundry.
4. Close the door.
5. Press Inicio/Pausa + carga.
13.12 Cancelling the pro-
gramme
1. Press Inicio/Pausa + carga.
2. Open the door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
If the temperature is high, start
the programme.
If the water level is high, start
the programme or select a
suitable programme for draining.
→"Programmes", Page24
3. Remove the laundry.
→"Unloading the laundry",
Page32

Table of Contents

Related product manuals