Need help?Do you have a question about the Balboa Water Group SpaTouch2 and is the answer not in the manual?
General| Control Type | Touchscreen |
|---|---|
| Interface | Touchscreen |
| Number of Heaters Supported | 1 |
| Lighting Control | Yes |
| Water Feature Control | Yes |
| Display | LCD |
Describes icons for temperature adjustment, equipment control, and accessing settings.
Provides instructions on how to adjust the spa's set temperature using up/down buttons.
Displays icons for controlling spa equipment like jets, lights, and blower.
Explains that the settings screen controls programming and lists available setting icons.
Details high vs. low range settings, their limits, and common usage scenarios.
Explains Ready vs. Rest, Circulation, and Ready-in-Rest modes for heating.
Describes the priming mode sequence and the temporary disablement of the heater.
Provides steps to start pumps in priming mode and highlights important warnings.
Explains how the system activates water devices to protect against freezing conditions.
Explains the importance of setting time for filtration and how to perform the setting.
Details how to set the start time and duration for main filtration cycles.
Provides a step-by-step guide to locking and unlocking the panel or settings.
Details the steps and options for performing a GFCI test on the system.
Explains the importance of GFCI testing for proper installation and safety.
Provides instructions on how to manually trigger the GFCI test sequence.
Explains messages related to unknown, too hot, or low water temperatures.
Describes the message and actions taken by the system for potential freezing.
Details electrical requirements, grounding, and GFCI/RCD connection standards.
Explains CSA enclosure ratings, safety cautions, and warnings for installation.
Provides warnings regarding spa use, health precautions, and water chemistry.
Highlights electrical shock hazards and restrictions on user serviceability.
To Next Page
