BALDR 330 - CLEANING AND CARE; Cleaning Procedures; STORAGE GUIDELINES; Storing the Power Station

STORAGE
ATTENTION
CLEANING
Transportation:BALDR 330 complies with all legal requirements for transport of dangerous
goods. The capacity of the lithium battery pack exceeds 100Wh. Based on international
standards, if BALDR 330 is transported by airplane, it must be transported in accordance with
IATA standard packaging. IATA instructions and labeling requirements and the relevant
declarations must be completed.
If storing for more than 1 month, charge completely before storage and recharge approximately
every 3 months to avoid full discharge and possible damage.
Store indoors, in cool temperatures, mild humidity, and away from direct sunlight (See GENERAL
SPECIFICATIONS section). Leaving in a vehicle or other confined spaces in extreme hot
temperatures can lead to decreased service life, overheating, and fire. Extreme cold conditions
below specific storage range can also harm BALDR 330 performance and service life.
Keep away from corrosion chemicals and gases.
After taking out of storage, visually inspect to make sure BALDR 330 and all accessories look
satisfactory. This increase review the intake and exhaust side vents to ensure they are clear of
debris. Allow BALDR 330 to return to ambient conditions before recharging, or charging other
Be sure that BALDR 330 is disconnected from all input power sources and output devices.
Use a clean, dry, soft-lint-free cloth to wipe down it. Remove any debris, dirt, or other
blockages on both side vents. When cleaning debris from the side vents, do not allow the
debris, dirt, or other blockages to enter the body of BALDR 330.
DO NOT use abrasive cleaners or solvents.
DO NOT use compressed air to clean side cooling vents, as this will force foreign
particles into the internal circuitry.
To avoid the risk of electrical shock, DO NOT use metal objects to clean ports.
8
devices.