Time Memory Function
4. Alarm & Snooze Function
1) When alarm rings, touch “Snooze/Dimmer” key to have 5 min snooze interval. When
into snooze mode, the alarm indicator will be flashing.
2) When alarm rings, hold and press “Snooze/Dimmer” key for 3 seconds or tap any other
key to stop alarm. And a Bi sound will remind you the alarm clock is turned off.
3) The alarm will keep ringing for 2 minutes if without any operation. The alarm will auto-
matically be turned off then.
5. Reset
1) In any condition, press “RESET” key, all the settings will return to default values: Date
on 2016.1.1, 12H time mode, 12:00PM, dual display mode, temperature in ℃, alarm
clock A1/A2/A3 all off, the alarm key on, LED light in the brightest.
2) In any condition, press “RESET” key, the clock comes to self-check status: Full bright
display->Full display 0->Full display 1----Full display 9->12:00 PM->Seconds->Alarm
On Display(with buzzer reminder)->Month/day division(with buzzer reminder) ->Temp-
erature unit(with buzzer reminder)
When the AC/DC adaptor is disconnected, the LED screen will not display, while the bu-
ilt-in battery still keeps time operating inside. When you connect the adapter next time,
the screen will automatically display current time without any setting.
Power Supply
AC/DC Adapter:
Input Voltage: 100-240V 50/60HZ
Output Voltage：5V/500mA
Built-in CR2032 Battery just for setting memory when power off by the adaptor. So you
will not need to reset from beginning after power on.
Page6
To Next Page
Loading...
