To Next PageTo Next Page
Need help?Do you have a question about the Balex BXHT 6025 and is the answer not in the manual?
Defines hazard symbols like danger, warning, important, and note for user safety.
Explains meanings of various warning labels found on the hedge trimmer for safe operation.
Explains symbols for refueling/choke and general safety rules for using the machine.
Details safe working conditions, environmental factors, and planning work sessions to avoid injury.
Covers area safety, obstacle checks, and unit inspection before starting the hedge trimmer.
Step-by-step guide for safely starting the hedge trimmer's engine, including warnings.
Provides instructions on maintaining engine speed, keeping safe distance from hot parts, and ensuring a secure position.
Outlines general maintenance requirements, safety during maintenance, and using original parts.
Details safe practices for handling gasoline, refueling, and avoiding hazards like sparks and fumes.
Provides instructions on how to safely carry and transport the hedge trimmer.
Offers recommendations for storing fuel, mixing gasoline and oil, and a mixing chart.
Step-by-step guide for safely fueling the hedge trimmer, including cap security and wiping spillage.
Emphasizes critical safety points during fueling, such as ground selection and distance from the unit.
Lists common errors to avoid when using and storing fuel for the hedge trimmer.
Detailed steps for starting the hedge trimmer engine, including priming, choke, and throttle usage.
Instructions on how to properly stop the hedge trimmer's engine safely.
Guides on how to adjust the engine's idling speed for optimal performance.
Provides methods for vertical and horizontal hedge trimming for best results.
Lists forbidden uses and necessary safety precautions during operation, like using two hands.
A comprehensive chart detailing maintenance tasks, frequency, and procedures for the hedge trimmer.
Instructions for cleaning and checking air/fuel filters, spark plug, and inspecting the muffler.
Details on cleaning the air cooling vent and oiling/sharpening the blades for longevity.
Instructions for refilling the gear housing with grease to ensure smooth operation of the gearbox.
General