25
■
Maintenance procedure for the boiler section
①
Remove the boiler cover in the direction of the arrow.
Boiler cover
②
Wipe inside and around the boiler tray with a soft cloth moistened with water.
Boiler tray
If dirt remains, soak a soft cloth or the like in diluted dishwashing detergent (neutral) and wring it out
thoroughly. Use the cloth to wipe o the dirt. Then, wipe the unit with water and dry it thoroughly.
③
Clean the boiler cover with diluted dishwashing detergent (neutral) and dry it thoroughly.
④
When installing the boiler cover, refer to the procedure in “Using the product for the rst
time”
2
(P.9), and place the cover on the boiler tray.
Place the boiler cover between the guides on both sides.
To Next Page