Precautions required to install
the motoreducer
Before installing the motor always read all the manual.
The manual not only explain how to install the motor in the correct way
but explain also which safety standard the gate must respect.
Pre installation check
Verify that the gate:
- can slide properly, without hangings
- it’s straight and moving without oscillations
- it’s sliding inside the guides
- have mechanical swing stopper installed
These problems if present, must be corrected before installing
the motor.
Standard specifications
These standards define the mechanical requisites needed for motorised
residential gates in public areas.
To guarantee the safety the installer must verify:
Tools needed
for the
installation
of the motor
4
To Next Page
Loading...