Bame ROY9 - Emergency Release System Operation

Emergency release system:
in case of power supply failure it’s possible to unlock the gate manually
following these instructions:
1. using the key supplied with the motor unlock the small cover on the
side of the motor (fig.1)
2. inside the cover is housed an hexagonal key of 6 mm (fig.2)
3. insert the key inside the unlocking system and turn clockwise
about 3-4 turns (fig.3)
4. to lock the motor again turn the key anticlockwise about 3-4 turns
5. replace the hexagonal key inside the cover and lock the cover again
with the key supplied, store the key in a safe place.
FIG. 1
FIG. 2
FIG. 3
ATTENTION:
THIS SHEET
MUST BE
CONSIGNED
TO THE CLIENT
ATTENTION:
THE CUSTOMER
MUST KEEP
THIS SHEET
TOGETHER WITH
THE KEY IN A
SAFE PLACE.
THE PLACE
WHERE THE KEY
IS STORED MUST
BE ACCESSIBLE
ALSO IN CASE
OF POWER
FAILURE
ATTENTION:
INFORM ALSO
OTHER USERS
OF THE
AUTOMATION
ABOUT THE
PLACE WHERE
THE KEY AND
THIS SHEET
ARE STORED.
7