Bamix classic - Technical details

34
Technical details
Motor 230/240 V AC/50 cycles
Power input Model E / EO 120 = 120 W
Model E / EO 140 = 140 W
Model E / EO 160 = 160 W
Model E / EO 180 = 180 W
Model E / EO 200 = 200 W
r.p.m. Model E / EO 120 = 7’000/12’000 rev./min
Model E / EO 140 = 10’000/15’000 rev./min
Model E / EO 160 = 10’000/16’000 rev./min
Model E / EO 180 = 11’500/16’500 rev./min
Model E / EO 200 = 12’000/17’000 rev./min
Mechanical and EN 60335-2-14/A11:2011
electrical safety EN 60335-1:2012
EN 61000-3-2/A2:2009
EN 61000-3-3:2008
EN 55014-1/A1:2009
EN 55014-2/A2:08
EN 62233:2008
Insulation double sleeving
Switch safety switch with impulse contact
Total length 35 cm
Weight 930 g
Cable 1,9 m
Intermittent operation 5 minutes at a time
Material and housing All material parts are rust-proof,
tasteless and resistant to corrosive foodstuffs
Official test
marks
Manufacturer ESGE AG, CH-9517 Mettlen/Schweiz
We reserve the right to make technical alterations.
Above specifications are country-specific.