Banana Pi BPI-M2+ - How to burn android image to eMMC under windows

6,ifallisok,trytobootfromeMMC,ifnotsuccess,justneedtryagain.
HowtoburnandroidimagetoeMMCunder
Linux
1,downloadandroidimagefromhttp://www.banan-pi.orgdownloadpage.
2,downloadLinux32bitorLinux64bittooling
3,UbuntuOSrunLiveSuit_For_Linux32(or64)DirectoryLiveSuit.run
sudo./LiveSuit.run
ifpromptmessagemissingdkmsmodule,pleaseinstallit：
sudoapt-getinstalldkms
sudo./LiveSuit.run
4，installdrivers:
sudodpkg-iawdev-dkms_0.4_all.deb
5,whenfinished,rebootsystem
6,Ubuntusystemaddudevrules:
sudovim/etc/udev/rules.d/10-local.rules
BPI-M2+（BPI-M2Plus）H3quadcordsingleboardcomputer
48HowtoburnandroidimagetoeMMC