
Do you have a question about the Banana Pi BPI-M2+ and is the answer not in the manual?
| SoC | Allwinner H3 |
|---|---|
| RAM | 1 GB DDR3 |
| HDMI | HDMI 1.4 |
| Camera | CSI connector |
| GPIO | 40-pin header |
| GPU | Mali-400 MP2 |
| Storage | MicroSD card slot |
| Wireless | WiFi 802.11 b/g/n, Bluetooth 4.0 |
| Ethernet | 10/100 Mbps |
| Audio Output | 3.5mm jack |
| Power Supply | 5V/2A |
Details the various hardware interfaces and connectors on the BPI-M2+ board.
Provides a detailed specification sheet for the BPI-M2+ hardware components.
Explains the pinout and definitions for the BPI-M2+ GPIO header.
A guide for first-time users to get started with the Banana Pi, including necessary accessories.
Step-by-step instructions for flashing Android images to the eMMC storage using Windows.
Loading...