IT5000-C / IT6000-C
3/8” IT Tool
www.BAND-IT-IDEX.com
Document # P48850 Rev. C
© Copyright
BAND-IT-IDEX, Inc. 2015
All rights reserved
Page 19 of 36
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925
Operating
Manual
• Using a hex key (supplied), adjust the Support Arm/Handle to ergonomically match
the operators hand.
Hex Key
Adjustable Support Arm / Handle for Hand Use
• Be sure not to adjust the Handle too far
outward (beyond interlocking legs) or the
handle will not function properly or
provide support to the operator.
Tool Ergonomics
• Tool weight – 7 Pounds (3.2 Kg)
• A Neutral wrist position is recommended
• A bent wrist can cause operator fatigue, and tool misuse
• Any fixture design should attempt to replicate the natural
human wrist / elbow / shoulder motions that would occur
when operating the tool in the hand-held configuration,
allowing the tool to float along a plane through the entire
Tension (pull-up) and Cut-Off (lock) process.
To Next Page
Loading...